Lecol 5500 Wood Flooring Adhesive
Lecol 5500 Wood Flooring Adhesive
✅ Made In USA
✅ Quick Delivery
✅ Cruelty Free
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Lecol 5500 Wood Flooring Adhesive
Lecol 5500 Parquet Flooring Adhesive is a professional solvent-based synthetic resin adhesive designed for the installation of solid wood flooring, engineered flooring and parquet.
Offering excellent initial grab, high bond strength and outstanding filling properties, Lecol 5500 has become a trusted choice for professional wood flooring installers on a wide range of interior flooring projects.
Why Choose Lecol 5500?
- Professional solvent-based parquet adhesive
- Excellent initial grab
- Very high bond strength
- Excellent gap-filling properties
- Suitable for compatible underfloor heating systems
- Ready to use straight from the tin
- Suitable for absorbent and non-absorbent subfloors
- Widely trusted by professional flooring installers
Suitable Flooring Types
Lecol 5500 is suitable for bonding:
- Solid wood flooring
- Engineered wood flooring
- Wood block flooring
- Parquet flooring
- Many pre-finished timber floors
Professional Advice:
Always ensure the subfloor is clean, dry and correctly prepared before
installation. Select the appropriate notched trowel to achieve the
required adhesive coverage and transfer.
Technical Information
| Product type | Solvent-based synthetic resin parquet adhesive |
|---|---|
| Pack size | 16kg (also available in 6kg) |
| Coverage | Approximately 0.9kg/m² |
| Application | Suitable notched flooring trowel |
| Suitable for UFH | Yes |
| Subfloors | Suitable absorbent and non-absorbent subfloors |
Coverage is approximate and will vary depending on the trowel notch, flooring type and subfloor condition.
Recommended Application Tools
Apply Lecol 5500 using a suitable wood flooring glue trowel to achieve the correct adhesive spread and full transfer to the flooring.
Suitable Subfloors
- Concrete
- Cement screeds
- Suitable timber subfloors
- Suitable absorbent subfloors
- Suitable non-absorbent subfloors
Application
- Ensure the subfloor is dry, clean and structurally sound.
- Select the appropriate notched flooring trowel.
- Spread the adhesive evenly over the prepared substrate.
- Lay the flooring into the wet adhesive.
- Check regularly for sufficient adhesive transfer.
- Remove excess adhesive immediately.
- Allow the adhesive to cure before heavy use.
Important: Always follow the latest Lecol Technical Data Sheet together with the flooring manufacturer's installation instructions. Adhesive suitability, coverage and curing times will vary depending on the flooring type, subfloor and site conditions.
Collapsible row
Collapsible row
