{"product_id":"osmo-uv-protection-oil-extra-clear-exterior-wood-oil","title":"Osmo UV-Protection Oil Extra – Clear Exterior Wood Oil","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n\u003cdiv class=\"wwfs-product-intro\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOsmo UV-Protection Oil Extra\u003c\/strong\u003e is a clear exterior wood\noil developed for vertical timber surfaces including doors, windows,\ncladding, fences, pergolas, balconies, carports and summerhouses.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIts natural oil-based formulation penetrates into the timber while\ncreating a highly water-repellent, breathable and weather-resistant\nsurface. The microporous finish allows the wood to breathe naturally,\nhelping to reduce swelling and shrinkage without forming a brittle coating\nthat cracks, peels, flakes or blisters.\n\u003c\/p\u003e\n\n\u003cp\u003e\nWhen applied as a complete two-coat system on suitable untreated vertical\ntimber, UV-Protection Oil Extra slows the natural greying process by a\nfactor of up to 12 compared with untreated wood. It also contains active\ningredients that help protect the finished coating against mould, algae\nand fungal attack.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWiltshire Wood Recommendation:\u003c\/strong\u003e\u003cbr\u003e\nChoose UV-Protection Oil Extra for exterior vertical timber where you\nwant clear protection together with additional resistance against mould,\nalgae and fungal growth within the coating.\n\u003c\/p\u003e\n\n\u003cp\u003e\nApply two exceptionally thin coats to bare timber. For renovation, one\nthin coat is normally sufficient where the existing finish remains sound,\nclean and well bonded.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eClear Protection for Vertical Exterior Timber\u003c\/h2\u003e\n\n\u003cp\u003e\nOsmo UV-Protection Oil Extra is designed specifically for vertical exterior\nwood. Vertical surfaces shed water more readily than horizontal decking,\nallowing the clear oil system to provide long-lasting protection while\nkeeping the timber grain and natural colour visible.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIt can be used either as a standalone clear finish or as a clear final coat\nover compatible coloured Osmo exterior treatments to help extend the\ninterval between maintenance coats.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eFor Vertical Timber Only:\u003c\/strong\u003e UV-Protection Oil Extra is not\nintended as the primary finish for horizontal decking, steps or frequently\nwalked-on exterior timber. For decking, use\n\nOsmo Decking Oil\n\nor the appropriate anti-slip decking system.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhy Choose Osmo UV-Protection Oil Extra?\u003c\/h2\u003e\n\n\u003cul class=\"wwfs-benefit-list\"\u003e\n\u003cli\u003eClear exterior protection for vertical timber surfaces\u003c\/li\u003e\n\u003cli\u003eUV-protection factor up to 12 with a complete two-coat system\u003c\/li\u003e\n\u003cli\u003eHelps slow the natural greying process\u003c\/li\u003e\n\u003cli\u003eContains active ingredients against mould, algae and fungal attack\u003c\/li\u003e\n\u003cli\u003eHighly water-repellent and weather-resistant\u003c\/li\u003e\n\u003cli\u003eMicroporous and breathable\u003c\/li\u003e\n\u003cli\u003eHelps reduce swelling and shrinkage\u003c\/li\u003e\n\u003cli\u003eWill not crack, peel, flake or blister\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior doors, windows and shutters\u003c\/li\u003e\n\u003cli\u003eSuitable for cladding, fences, pergolas and summerhouses\u003c\/li\u003e\n\u003cli\u003eSuitable as a clear topcoat over compatible coloured exterior finishes\u003c\/li\u003e\n\u003cli\u003eEasy to maintain without complete sanding\u003c\/li\u003e\n\u003cli\u003eNormally requires two thin coats on bare timber\u003c\/li\u003e\n\u003cli\u003eNormally requires one thin coat for renovation\u003c\/li\u003e\n\u003cli\u003eAvailable in clear satin and clear matt finishes\u003c\/li\u003e\n\u003cli\u003eAvailable in 0.75L and 2.5L sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUV-Protection Oil vs UV-Protection Oil Extra\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMain Difference\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo UV-Protection Oil 410\n\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber where a clear, biocide-free finish is\npreferred.\n\u003c\/td\u003e\n\u003ctd\u003e\nDoes not contain the additional active ingredients used to protect\nthe coating against mould, algae and fungal attack.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eOsmo UV-Protection Oil Extra\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber exposed to damp, shaded or more demanding\noutdoor conditions.\n\u003c\/td\u003e\n\u003ctd\u003e\nContains active ingredients that help protect the coating against\nmould, algae and fungal attack.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWhich One Should You Choose?\u003c\/strong\u003e\u003cbr\u003e\nChoose\n\nUV-Protection Oil 410\n\nwhere you specifically want the standard clear system without added\nbiocidal active ingredients.\n\u003c\/p\u003e\n\n\u003cp\u003e\nChoose UV-Protection Oil Extra where the additional mould, algae and\nfungal resistance within the coating is beneficial, particularly on\nshaded, damp or heavily exposed exterior timber.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eExtra Is for Exterior Use Only:\u003c\/strong\u003e UV-Protection Oil Extra\ncontains active biocidal ingredients and should only be used on suitable\noutdoor timber. It is not intended for children’s toys, animal enclosures,\nfood-contact surfaces or interior woodwork.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eChoose Your Finish\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFinish\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eAppearance\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e420 Clear Satin\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nA clear finish that enriches the timber with a subtle satin sheen.\n\u003c\/td\u003e\n\u003ctd\u003e\nDoors, windows, cladding and joinery where a traditional, gently\npolished exterior appearance is preferred.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1420 Clear Matt\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nA clear lower-sheen finish that retains a more natural-looking\nexterior appearance.\n\u003c\/td\u003e\n\u003ctd\u003e\nContemporary cladding, fencing and exterior joinery where minimal\nvisible sheen is preferred.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eClear Oil Still Changes Timber Colour:\u003c\/strong\u003e Both variants are\nclear, but the oil will normally enrich and slightly darken the natural\ncolour of the timber. Complete a representative trial before coating the\nfull area.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhich Osmo Exterior Product Is Right for Me?\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOsmo Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKey Difference\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eUV-Protection Oil Extra\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior doors, windows, cladding, fencing, pergolas and\nsummerhouses.\n\u003c\/td\u003e\n\u003ctd\u003e\nClear UV protection with added mould, algae and fungal resistance\nwithin the coating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nUV-Protection Oil 410\n\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber where a standard clear, biocide-free\nsystem is preferred.\n\u003c\/td\u003e\n\u003ctd\u003e\nSimilar clear UV protection without the added active ingredients\nfound in Extra.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nUV-Protection Oil Tints\n\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical timber where transparent colour and stronger visible UV\nprotection are required.\n\u003c\/td\u003e\n\u003ctd\u003e\nAdds transparent pigment while keeping the wood grain visible.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nHorizontal decking, steps and frequently walked-on exterior timber.\n\u003c\/td\u003e\n\u003ctd\u003e\nDesigned for the greater weather and wear exposure experienced by\nhorizontal surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nGarden Furniture Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nHardwood garden furniture and exterior furniture surfaces.\n\u003c\/td\u003e\n\u003ctd\u003e\nSpecialist clear oil developed particularly for garden furniture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSuitable Surfaces\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eExterior wooden doors\u003c\/li\u003e\n\u003cli\u003eWindow frames\u003c\/li\u003e\n\u003cli\u003eWindow shutters\u003c\/li\u003e\n\u003cli\u003eTimber cladding\u003c\/li\u003e\n\u003cli\u003eWeatherboarding\u003c\/li\u003e\n\u003cli\u003eFencing\u003c\/li\u003e\n\u003cli\u003ePrivacy screens\u003c\/li\u003e\n\u003cli\u003ePergolas\u003c\/li\u003e\n\u003cli\u003eCarports\u003c\/li\u003e\n\u003cli\u003eBalcony balustrades\u003c\/li\u003e\n\u003cli\u003eSummerhouses\u003c\/li\u003e\n\u003cli\u003eGarden buildings\u003c\/li\u003e\n\u003cli\u003eTimber façades\u003c\/li\u003e\n\u003cli\u003eVertical timber panels\u003c\/li\u003e\n\u003cli\u003ePreviously Osmo-treated vertical timber following suitable preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eNot for Horizontal Decking:\u003c\/strong\u003e Do not use UV-Protection Oil\nExtra as a replacement for Decking Oil on horizontal walking surfaces,\ndeck boards or exterior steps.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSuitable Timber Species\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTimber\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSuitability\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePreparation Guidance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOak, beech, ash, alder and birch\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nEnsure the timber is clean, absorbent and below approximately 20%\nmoisture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eThermowood and thermally modified timber\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nThese timbers can grey quickly, so early treatment or a tinted\nsystem may be preferable.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePine, spruce and Douglas fir\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable with WR Base Coat recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nConsider\n\nOsmo WR Base Coat\n\nbefore applying the finish.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eAccoya and Kebony\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable with WR Base Coat recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nFollow Osmo’s preparation guidance and complete a representative\ntrial.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eCedar, teak, iroko, mahogany and walnut\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after weathering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nAllow ingredient-rich timber to weather sufficiently so natural\noils and extractives reduce before application.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eLarch\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after approximately 2–6 weeks’ weathering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nWR Base Coat is also recommended before the finishing system.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eSapele\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after approximately 3–4 weeks’ weathering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nCheck absorption and complete a trial application.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePressure-treated timber\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after sufficient weathering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nAllow treatment salts and excess moisture to disperse before\ncoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreen oak\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNot suitable while wet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nDo not apply until moisture content is below approximately 20%.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nTimber species, treatment chemicals, natural oils and moisture content can\nall affect absorption and drying. Always complete a representative trial\nbefore coating the full area.\n\u003c\/p\u003e\n\n\u003ch2\u003eUsing UV-Protection Oil Extra as a Clear Topcoat\u003c\/h2\u003e\n\n\u003cp\u003e\nUV-Protection Oil Extra can be used as a clear final coat over compatible\nOsmo exterior colour treatments to extend the maintenance interval while\nallowing the underlying colour to remain visible.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eClear Topcoat System:\u003c\/strong\u003e\u003cbr\u003e\nApply the selected compatible coloured Osmo exterior finish and allow it\nto dry completely. Then apply one exceptionally thin coat of\nUV-Protection Oil Extra as the final clear protective layer.\n\u003c\/p\u003e\n\n\u003cp\u003e\nAlways confirm compatibility and complete a test area because adding a\nclear topcoat may enrich the colour or alter the final sheen.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eTwo Clear Coats Are Required on Bare Timber:\u003c\/strong\u003e To achieve\nthe stated UV-protection factor of 12 when using UV-Protection Oil Extra\nas a standalone clear finish, apply two thin coats. A single clear coat on\nuntreated timber provides a significantly shorter protection period.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCleaning and Reviving Existing Timber\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTimber Condition\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral surface dirt\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning exterior timber before maintenance or recoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreyed and weathered timber\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRemoving the grey weathered patina before applying a new coating\nsystem.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eOrganic surface contamination\u003c\/td\u003e\n\u003ctd\u003eOsmo Gard Clean\u003c\/td\u003e\n\u003ctd\u003e\nTreating green growth and exterior contamination before refinishing.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eClean but lightly worn finish\u003c\/td\u003e\n\u003ctd\u003eMatching UV-Protection Oil Extra\u003c\/td\u003e\n\u003ctd\u003e\nNormally one thin maintenance coat once the surface is clean and\ndry.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eAllow Timber to Dry Fully:\u003c\/strong\u003e After cleaning, rinsing or\nusing Wood Reviver Power-Gel, allow the timber to dry completely and\nconfirm that moisture content is below approximately 20% before coating.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Application Tools\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eApplication Tool\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow It Is Used\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nDoors, windows, frames, cladding boards and detailed exterior\ntimber.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply thinly with the grain and stretch the product thoroughly into\nan even film.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Microfibre Roller\n\n\u003c\/td\u003e\n\u003ctd\u003e\nLarger flat cladding panels, gates and smooth vertical timber.\n\u003c\/td\u003e\n\u003ctd\u003e\nLoad lightly, distribute the coating evenly and lay off along the\ngrain where necessary.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nWood Coating Brushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFrames, rebates, corners, mouldings and difficult exterior details.\n\u003c\/td\u003e\n\u003ctd\u003e\nChoose an appropriate brush width and check corners for heavy\ndeposits or runs.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nExtension Poles and Handles\n\n\u003c\/td\u003e\n\u003ctd\u003e\nHigher cladding and larger vertical surfaces where safer reach is\nrequired.\n\u003c\/td\u003e\n\u003ctd\u003e\nUse only with a compatible roller or brush and maintain full control\nof the coating thickness.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\nComplete individual boards or sections from end to end wherever possible.\nMaintain a wet edge and avoid stopping in the middle of prominent\ncladding boards, doors or panels.\n\u003c\/p\u003e\n\n\u003cp\u003e\nApply exceptionally thinly. Heavy application can cause runs, slow drying\nand uneven sheen, particularly on smooth vertical timber.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAccessory\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled application to doors, windows, cladding and joinery.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThin application across larger smooth vertical surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRestoring greyed and weathered timber before recoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nGeneral cleaning before maintenance or renovation.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo WR Base Coat\n\n\u003c\/td\u003e\n\u003ctd\u003e\nOptional base protection for suitable softwoods and modified timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable application equipment immediately after use.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAvailable Sizes\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSize\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Coverage Per Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.75L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 13.5m²\u003c\/td\u003e\n\u003ctd\u003e\nDoors, windows, gates, smaller cladding areas and local exterior\nprojects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e2.5L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 45m²\u003c\/td\u003e\n\u003ctd\u003e\nLarger cladding, fencing, pergolas, summerhouses and professional\nexterior projects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage is based on approximately 18m² per litre for one thin coat on\nsmooth, prepared timber. Rough-sawn, weathered, textured or highly absorbent\nsurfaces may use more product.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eCalculate for Two Coats:\u003c\/strong\u003e New untreated timber normally\nrequires two thin coats. A 2.5L tin may cover up to approximately 45m² for\none coat or approximately 22.5m² as a complete two-coat system.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eClear natural oil-based exterior UV protection finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended use\u003c\/th\u003e\n\u003ctd\u003eVertical exterior timber surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish options\u003c\/th\u003e\n\u003ctd\u003e420 Clear Satin and 1420 Clear Matt\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable sizes\u003c\/th\u003e\n\u003ctd\u003e0.75L and 2.5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003eTwo thin coats on bare timber\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRenovation coat\u003c\/th\u003e\n\u003ctd\u003eNormally one thin coat on clean, sound existing finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate coverage\u003c\/th\u003e\n\u003ctd\u003eUp to approximately 18m² per litre, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate drying time\u003c\/th\u003e\n\u003ctd\u003eApproximately 12 hours with good ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum timber moisture\u003c\/th\u003e\n\u003ctd\u003eApproximately 20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUV performance\u003c\/th\u003e\n\u003ctd\u003e\nUV-protection factor up to 12 compared with untreated wood when two\ncoats are applied\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eActive protection\u003c\/th\u003e\n\u003ctd\u003e\nContains active ingredients against mould, algae and fungal attack\nwithin the coating\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication tools\u003c\/th\u003e\n\u003ctd\u003eOsmo Flat Brush, suitable wood-coating brush or microfibre roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool cleaning\u003c\/th\u003e\n\u003ctd\u003eOsmo Brush Cleaner \u0026amp; Thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReady to use\u003c\/th\u003e\n\u003ctd\u003eYes – stir thoroughly and do not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse location\u003c\/th\u003e\n\u003ctd\u003eExterior use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage and drying times are approximate. Timber species, porosity,\ntexture, preparation, temperature, humidity, ventilation and application\nthickness will affect the result.\n\u003c\/p\u003e\n\n\u003ch2\u003eBest Conditions for Application\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eApply to clean, dry and frost-free timber.\u003c\/li\u003e\n\u003cli\u003eTimber moisture content must not exceed approximately 20%.\u003c\/li\u003e\n\u003cli\u003eChoose a dry weather window with no rain forecast during drying.\u003c\/li\u003e\n\u003cli\u003eAvoid application in direct intense sunlight.\u003c\/li\u003e\n\u003cli\u003eDo not apply to timber that is excessively hot.\u003c\/li\u003e\n\u003cli\u003eAvoid application during frost, heavy dew or high humidity.\u003c\/li\u003e\n\u003cli\u003eProvide good airflow while each coat dries.\u003c\/li\u003e\n\u003cli\u003eAllow each coat to dry completely before recoating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eCheck the Weather Forecast:\u003c\/strong\u003e Rain, dew or high moisture\nbefore the finish has dried can cause marking, patchiness and delayed\ncuring.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\nEnsure the timber is clean, dry, frost-free and free from grease, dirt,\nalgae and contamination.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTimber moisture content must be below approximately 20%.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow ingredient-rich, resinous or pressure-treated timber to weather\nsufficiently before coating.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean sound old microporous Osmo finishes thoroughly before renovation.\n\u003c\/li\u003e\n\n\u003cli\u003e\nLightly sand weathered or uneven coatings where necessary.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove paint, varnish, lacquer and incompatible film-forming finishes\ncompletely.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRevive greyed timber using\n\nOsmo Wood Reviver Power-Gel\n.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean organic contamination using the appropriate exterior cleaner.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRound sharp exterior edges to a radius greater than approximately 2mm\nwhere practical.\n\u003c\/li\u003e\n\n\u003cli\u003e\nEnsure horizontal details attached to vertical timber have sufficient\nfall to shed water.\n\u003c\/li\u003e\n\n\u003cli\u003e\nVacuum or brush away all sanding dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStir the product thoroughly before and during application.\n\u003c\/li\u003e\n\n\u003cli\u003e\nComplete a representative trial before coating the full area.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProtect All Faces Where Possible:\u003c\/strong\u003e On new doors, windows,\ncladding and joinery, apply the first coat to all faces and edges before\ninstallation wherever practical. This helps create more balanced\nprotection around the timber.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eHow to Apply UV-Protection Oil Extra\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nConfirm that the timber is clean, dry and ready to absorb oil.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStir the product thoroughly. Do not thin.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the first coat exceptionally thinly with an\n\nOsmo Flat Brush\n\nor suitable microfibre roller.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork with the grain and spread the product evenly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nComplete individual boards, doors or panels from end to end wherever\npossible.\n\u003c\/li\u003e\n\n\u003cli\u003e\nMaintain a wet edge and avoid heavy overlaps.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCheck corners, rebates, joints and lower edges for runs or pooled product.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRedistribute all visible excess before allowing the coating to dry.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow approximately 12 hours’ drying with good ventilation.\n\u003c\/li\u003e\n\n\u003cli\u003e\nOnce the first coat is fully dry, apply a second equally thin coat.\n\u003c\/li\u003e\n\n\u003cli\u003e\nProtect the timber from rain, dew and contamination throughout drying.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\nThin coats are essential on vertical timber. Heavy application will not\nprovide better UV protection and can lead to runs, tackiness, uneven sheen\nand extended drying times.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRenovating an Existing Finish\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nInspect the existing coating for wear, greying, mould and contamination.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean the surface thoroughly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTreat greyed timber with Wood Reviver Power-Gel where required.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the timber to dry completely.\n\u003c\/li\u003e\n\n\u003cli\u003e\nLightly sand loose, rough or uneven areas.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove all dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply one exceptionally thin coat of the matching finish where the\nexisting coating remains sound.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhere the timber has become bare or heavily weathered, apply a complete\ntwo-coat system.\n\u003c\/li\u003e\n\n\u003cli\u003e\nMaintain good ventilation and protect from rain while drying.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eRecoat Before the Timber Greys:\u003c\/strong\u003e\u003cbr\u003e\nMaintenance is simplest when one thin coat is applied as soon as signs of\nwear become visible. Waiting until the timber has greyed completely may\nrequire de-greying, more preparation and a full two-coat treatment.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCleaning and Maintenance\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMaintenance Stage\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoutine cleaning\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRemoving dirt and general exterior contamination.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreyed timber restoration\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRemoving grey weathering before recoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreen growth treatment\u003c\/td\u003e\n\u003ctd\u003eOsmo Gard Clean\u003c\/td\u003e\n\u003ctd\u003e\nTreating algae and organic exterior contamination.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eMaintenance coat\u003c\/td\u003e\n\u003ctd\u003eMatching UV-Protection Oil Extra\u003c\/td\u003e\n\u003ctd\u003e\nRestoring weather resistance and appearance when wear begins to\nshow.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eImportant Application Notes\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse on suitable vertical exterior timber only.\u003c\/li\u003e\n\n\u003cli\u003eDo not use as the primary finish for horizontal decking.\u003c\/li\u003e\n\n\u003cli\u003eUse UV-Protection Oil Extra outside only.\u003c\/li\u003e\n\n\u003cli\u003eApply two exceptionally thin coats to bare timber.\u003c\/li\u003e\n\n\u003cli\u003e\nOne thin coat is normally sufficient for renovation where the existing\nfinish remains sound.\n\u003c\/li\u003e\n\n\u003cli\u003eStir thoroughly before and throughout application.\u003c\/li\u003e\n\n\u003cli\u003eDo not thin the product.\u003c\/li\u003e\n\n\u003cli\u003eTimber moisture content must not exceed approximately 20%.\u003c\/li\u003e\n\n\u003cli\u003e\nTwo clear coats are required to achieve the stated UV-protection factor.\n\u003c\/li\u003e\n\n\u003cli\u003e\nHeavy application can cause runs, tackiness and prolonged drying.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow approximately 12 hours between coats under suitable conditions.\n\u003c\/li\u003e\n\n\u003cli\u003eProtect the finish from rain and dew while drying.\u003c\/li\u003e\n\n\u003cli\u003eAllow ingredient-rich timber to weather before coating.\u003c\/li\u003e\n\n\u003cli\u003e\nConsider WR Base Coat for suitable softwoods and modified timber.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove paint, varnish and lacquer completely before application.\n\u003c\/li\u003e\n\n\u003cli\u003eAlways complete a representative test area.\u003c\/li\u003e\n\n\u003cli\u003e\nUse Wood Reviver Power-Gel where the natural greying process has already\nbegun.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRecoat before the existing protection has worn away completely.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTool Cleaning\u003c\/h2\u003e\n\n\u003cp\u003e\nClean suitable brushes, rollers and reusable application equipment\nimmediately after use with\n\nOsmo Brush Cleaner \u0026amp; Thinner\n.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOil-Soaked Cloth Safety:\u003c\/strong\u003e Cloths, pads and absorbent\nmaterials contaminated with drying oils can generate heat while curing.\nLay them flat outdoors to dry safely or store them in a suitable sealed\nmetal container before disposal in accordance with the safety data.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eComplete Your Osmo Exterior System\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo UV-Protection Oil 410\n\n\u003c\/td\u003e\n\u003ctd\u003e\nBiocide-free clear protection for suitable vertical exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo UV-Protection Oil Tints\n\n\u003c\/td\u003e\n\u003ctd\u003e\nTransparent coloured UV protection for vertical exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThin and controlled application to doors, windows and cladding.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nEfficient application across larger smooth vertical surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRestoring greyed timber before recoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRoutine cleaning and preparation of exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo WR Base Coat\n\n\u003c\/td\u003e\n\u003ctd\u003e\nOptional base protection for suitable softwoods and modified timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable brushes, rollers and tools after use.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nProtection for horizontal decking and exterior walking surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"0.75L \/ Satin 420","offer_id":44661999108199,"sku":"gwp1789815629351","price":24.33,"currency_code":"USD","in_stock":true},{"title":"0.75L \/ Matt 1420","offer_id":44661999140967,"sku":"kbh1789815629352","price":27.91,"currency_code":"USD","in_stock":true},{"title":"2.5L \/ Satin 420","offer_id":44661999173735,"sku":"yqk1789815629353","price":75.12,"currency_code":"USD","in_stock":true},{"title":"2.5L \/ Matt 1420","offer_id":44661999206503,"sku":"vnm1789815629354","price":64.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/9109\/5911\/files\/osmo-uv-protection-oil-extra-clear-exterior-wood-oil_1.png?v=1789815635","url":"https:\/\/yearroundseamwear.shop\/products\/osmo-uv-protection-oil-extra-clear-exterior-wood-oil","provider":"My Store","version":"1.0","type":"link"}