{"product_id":"osmo-uv-protection-oil-410-clear-exterior-wood-oil","title":"Osmo UV-Protection Oil 410 – Clear Exterior Wood Oil","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n\u003cdiv class=\"wwfs-product-intro\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOsmo UV-Protection Oil 410\u003c\/strong\u003e is a clear, satin exterior\nwood oil developed to protect vertical timber surfaces while keeping the\nnatural grain and character of the wood visible.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIdeal for exterior doors, windows, shutters, timber cladding, fencing,\npergolas, balconies, carports and summerhouses, its natural oil-based\nformulation penetrates into the timber while creating a highly\nwater-repellent, dirt-resistant and weather-resistant surface.\n\u003c\/p\u003e\n\n\u003cp\u003e\nWhen applied as a complete two-coat system to suitable untreated wood,\nUV-Protection Oil 410 slows the natural greying process by a factor of up\nto 12 compared with untreated timber. Unlike UV-Protection Oil Extra, 410\ndoes not contain additional active biocidal ingredients.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWiltshire Wood Recommendation:\u003c\/strong\u003e\u003cbr\u003e\nChoose Osmo UV-Protection Oil 410 when you want a clear exterior finish\nwith strong UV protection but without the active film preservatives found\nin UV-Protection Oil Extra.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIt is particularly useful for suitable animal enclosures and other\nexterior projects where a biocide-free clear coating is preferred.\nApply two exceptionally thin coats and maintain the finish before the\ntimber begins to grey.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eClear, Biocide-Free UV Protection\u003c\/h2\u003e\n\n\u003cp\u003e\nOsmo UV-Protection Oil 410 protects exterior timber without hiding its\nnatural colour, knots or grain beneath an opaque coating. The finish remains\nmicroporous and breathable, allowing moisture vapour to move through the\ntimber while helping to reduce swelling and shrinkage.\n\u003c\/p\u003e\n\n\u003cp\u003e\nUnlike many film-forming exterior varnishes, it does not create a brittle\nlayer that cracks, peels, flakes or blisters. When signs of weathering\neventually become visible, the timber can normally be cleaned and refreshed\nwithout completely sanding away the existing finish.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eVertical Exterior Timber Only:\u003c\/strong\u003e UV-Protection Oil 410 is\nintended for upright exterior surfaces that shed water naturally. It is\nnot the correct primary finish for horizontal decking, steps or exterior\nwalking surfaces.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhy Choose Osmo UV-Protection Oil 410?\u003c\/h2\u003e\n\n\u003cul class=\"wwfs-benefit-list\"\u003e\n\u003cli\u003eClear UV protection for vertical exterior timber\u003c\/li\u003e\n\u003cli\u003eSlows natural greying by a factor of up to 12\u003c\/li\u003e\n\u003cli\u003eBiocide-free formulation\u003c\/li\u003e\n\u003cli\u003eSuitable where active film preservatives are not wanted\u003c\/li\u003e\n\u003cli\u003eHighly water-repellent and dirt-resistant\u003c\/li\u003e\n\u003cli\u003eMicroporous and breathable\u003c\/li\u003e\n\u003cli\u003eHelps reduce swelling and shrinkage\u003c\/li\u003e\n\u003cli\u003eWill not crack, peel, flake or blister\u003c\/li\u003e\n\u003cli\u003eEnhances the timber grain with a clear satin appearance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior doors, windows and shutters\u003c\/li\u003e\n\u003cli\u003eSuitable for cladding, fencing and garden buildings\u003c\/li\u003e\n\u003cli\u003eSuitable for pergolas, carports and balconies\u003c\/li\u003e\n\u003cli\u003eCan be used as a clear final coat over compatible coloured finishes\u003c\/li\u003e\n\u003cli\u003eEasy to maintain without complete sanding\u003c\/li\u003e\n\u003cli\u003eTwo thin coats recommended on bare timber\u003c\/li\u003e\n\u003cli\u003eNormally one thin coat required for maintenance\u003c\/li\u003e\n\u003cli\u003eAvailable in 0.75L and 2.5L tins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUV-Protection Oil 410 vs UV-Protection Oil Extra\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMain Difference\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eUV-Protection Oil 410\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber where clear, biocide-free UV protection\nis preferred.\n\u003c\/td\u003e\n\u003ctd\u003e\nDoes not contain the active film protection used against mould,\nalgae and fungal attack in the Extra formulation.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo UV-Protection Oil Extra\n\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber in damp, shaded or more demanding\nconditions.\n\u003c\/td\u003e\n\u003ctd\u003e\nContains active ingredients that help protect the coating against\nmould, algae and fungal attack.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWhich Version Should You Choose?\u003c\/strong\u003e\u003cbr\u003e\nChoose 410 where a clear, biocide-free exterior finish is specifically\nwanted, including suitable animal enclosures.\n\u003c\/p\u003e\n\n\u003cp\u003e\nChoose\n\nUV-Protection Oil Extra\n\nwhere additional protection of the coating against mould, algae and\nfungal attack would be beneficial.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eBiocide-Free Does Not Mean Maintenance-Free:\u003c\/strong\u003e Dirt,\ndampness, shade and organic contamination can still encourage surface\ngrowth. Inspect and clean exterior timber regularly, particularly in\nsheltered or north-facing locations.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhich Osmo Exterior Product Is Right for Me?\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOsmo Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKey Difference\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eUV-Protection Oil 410\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber requiring clear, biocide-free UV\nprotection.\n\u003c\/td\u003e\n\u003ctd\u003e\nClear satin system that retains the natural timber appearance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nUV-Protection Oil Extra\n\n\u003c\/td\u003e\n\u003ctd\u003e\nVertical exterior timber requiring clear protection with added\nfilm preservatives.\n\u003c\/td\u003e\n\u003ctd\u003e\nAvailable in clear satin and clear matt, with active protection\nagainst mould, algae and fungal attack within the coating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nUV-Protection Oil Tints\n\n\u003c\/td\u003e\n\u003ctd\u003e\nDoors, windows and cladding where transparent colour and stronger\nvisible UV resistance are required.\n\u003c\/td\u003e\n\u003ctd\u003e\nContains transparent coloured pigments while keeping the wood grain\nvisible.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nHorizontal decking, exterior steps and timber walking surfaces.\n\u003c\/td\u003e\n\u003ctd\u003e\nDesigned for the greater moisture and wear exposure experienced by\nhorizontal timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Garden Furniture Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nTeak, hardwood tables, chairs, benches and exterior furniture.\n\u003c\/td\u003e\n\u003ctd\u003e\nSpecialist clear oil developed particularly for garden furniture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eClear Protection and Natural Colour Change\u003c\/h2\u003e\n\n\u003cp\u003e\nUV-Protection Oil 410 is clear and allows the original timber colour and\ngrain to remain visible. However, clear oil creates a natural wet-look\neffect that enriches and normally darkens untreated timber slightly.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eAlways Trial the Appearance:\u003c\/strong\u003e Clear does not mean\ninvisible. Oak, cedar, pine, larch and other woods may become warmer or\nricher after oiling. Apply a representative test area and allow it to dry\nbefore treating the full project.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eClear Oil vs Transparent Colour\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFinish Type\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eAppearance\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eUV Performance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV-Protection Oil 410 Clear\u003c\/td\u003e\n\u003ctd\u003e\nKeeps the natural timber colour visible while slightly enriching\nthe grain.\n\u003c\/td\u003e\n\u003ctd\u003e\nStrong clear UV protection when applied as a complete two-coat\nsystem.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eUV-Protection Oil Tints\u003c\/td\u003e\n\u003ctd\u003e\nAdds transparent colour while retaining visible grain and natural\nvariation.\n\u003c\/td\u003e\n\u003ctd\u003e\nPigment generally provides stronger visible resistance to greying,\nparticularly in deeper colours.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eOpaque exterior colour\u003c\/td\u003e\n\u003ctd\u003e\nCovers much more of the natural timber colour while retaining\nsurface texture.\n\u003c\/td\u003e\n\u003ctd\u003e\nNormally provides the strongest resistance to UV-related colour\nchange.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSuitable Surfaces\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eExterior wooden doors\u003c\/li\u003e\n\u003cli\u003eWindow frames\u003c\/li\u003e\n\u003cli\u003eWindow shutters\u003c\/li\u003e\n\u003cli\u003eTimber cladding\u003c\/li\u003e\n\u003cli\u003eWeatherboarding\u003c\/li\u003e\n\u003cli\u003eExterior fencing\u003c\/li\u003e\n\u003cli\u003ePrivacy screens\u003c\/li\u003e\n\u003cli\u003ePergolas\u003c\/li\u003e\n\u003cli\u003eCarports\u003c\/li\u003e\n\u003cli\u003eBalcony balustrades\u003c\/li\u003e\n\u003cli\u003eExterior gates\u003c\/li\u003e\n\u003cli\u003eSummerhouses\u003c\/li\u003e\n\u003cli\u003eGarden buildings\u003c\/li\u003e\n\u003cli\u003eVertical timber façades\u003c\/li\u003e\n\u003cli\u003eSuitable wooden animal enclosures\u003c\/li\u003e\n\u003cli\u003ePreviously Osmo-treated vertical timber after suitable preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eNot for Decking:\u003c\/strong\u003e Do not use UV-Protection Oil 410 as the\nprimary finish on horizontal deck boards, exterior steps or other\nfrequently walked-on surfaces. Use an appropriate\n\nOsmo Decking Oil\n\nsystem instead.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSuitable Timber Species\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTimber\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSuitability\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePreparation Guidance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOak, ash, beech, alder and birch\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nEnsure the timber is clean, absorbent and below approximately 20%\nmoisture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePine and spruce\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nConsider\n\nOsmo WR Base Coat\n\nwhere additional preservative protection is required.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eDouglas fir and larch\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after weathering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nAllow resinous timber to weather until the surface becomes\nsufficiently absorbent.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eCedar\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after weathering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nAllow natural oils and extractives to reduce before application.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eTeak, iroko, mahogany and other oily hardwoods\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nAllow ingredient-rich timber to weather adequately or degrease\ncarefully before coating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePressure-treated timber\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable after sufficient drying\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nAllow excess treatment moisture and salts to disperse before\napplication.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eThermally modified timber\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nTreat before substantial greying occurs and confirm consistent\nabsorption.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreen oak\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNot suitable while wet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nDo not coat until timber moisture content is below approximately\n20%.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nTimber varies in resin, extractives, treatment chemicals and moisture.\nAlways complete a representative trial before coating the full surface.\n\u003c\/p\u003e\n\n\u003ch2\u003eNew Timber May Need to Weather First\u003c\/h2\u003e\n\n\u003cp\u003e\nNew resinous and ingredient-rich exterior timber may contain natural oils,\nresin or treatment chemicals that prevent an exterior oil from penetrating\nand drying correctly.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTimber Condition\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTypical Preparation\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eReason\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngredient-rich hardwood\u003c\/td\u003e\n\u003ctd\u003eAllow a suitable exterior weathering period.\u003c\/td\u003e\n\u003ctd\u003e\nReduces natural oils and extractives that can interfere with\nabsorption and drying.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eDouglas fir or larch\u003c\/td\u003e\n\u003ctd\u003eAllow resinous timber to weather before coating.\u003c\/td\u003e\n\u003ctd\u003e\nImproves absorption and reduces the likelihood of sticky areas.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePressure-treated timber\u003c\/td\u003e\n\u003ctd\u003eWait until fully seasoned and below the moisture limit.\u003c\/td\u003e\n\u003ctd\u003e\nFresh treatment moisture and salts can disrupt coating performance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eRecently sanded oily timber\u003c\/td\u003e\n\u003ctd\u003eWeather or carefully degrease before applying oil.\u003c\/td\u003e\n\u003ctd\u003e\nSanding can expose fresh natural oils at the surface.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eSimple Absorption Check:\u003c\/strong\u003e\u003cbr\u003e\nPlace a small amount of clean water on the dry timber. If it remains\ntightly beaded on the surface, the wood may not yet be ready to accept the\nfinish. Timber that absorbs and darkens evenly is more likely to be ready,\nalthough a full product test is still required.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eUsing WR Base Coat\u003c\/h2\u003e\n\n\u003cp\u003e\nOn suitable untreated softwood, Osmo WR Base Coat can be applied before\nUV-Protection Oil 410 where additional protection against blue stain, rot\nand insect attack is required.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eRecommended Softwood System:\u003c\/strong\u003e\u003cbr\u003e\nApply\n\nOsmo WR Base Coat\n\nto suitable clean, dry and absorbent timber in accordance with its\ninstructions. Once fully dry, complete the decorative system with two thin\ncoats of UV-Protection Oil 410.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWR Base Coat Is Not a Finished Surface:\u003c\/strong\u003e It must be\novercoated with a compatible exterior decorative finish. Always check\nsuitability for the timber, project and intended use.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eUsing 410 as a Clear Topcoat\u003c\/h2\u003e\n\n\u003cp\u003e\nUV-Protection Oil 410 can also be used as a clear final coat over compatible\ncoloured Osmo exterior finishes where a biocide-free topcoat is preferred.\n\u003c\/p\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nApply the selected compatible coloured exterior finish.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the coloured coating to dry completely.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTest the clear topcoat to check colour and sheen changes.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply one exceptionally thin coat of UV-Protection Oil 410.\n\u003c\/li\u003e\n\n\u003cli\u003e\nSpread evenly with the grain and remove all heavy deposits.\n\u003c\/li\u003e\n\n\u003cli\u003e\nProtect the surface from rain and dew while drying.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eClear Oil May Enrich the Colour:\u003c\/strong\u003e A clear topcoat can make\nan underlying stain appear warmer or slightly darker. Always test the\ncomplete colour and topcoat system before treating the full project.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCleaning and Reviving Existing Exterior Timber\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTimber Condition\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral dirt and surface contamination\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable exterior wood before maintenance or recoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreyed and weathered timber\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRemoves the grey weathered patina before applying a fresh coating\nsystem.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eGreyed timber requiring scrubbing\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaning Scrub Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWorks cleaner or Reviver Gel into the grain and surface texture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eClean but lightly worn coating\u003c\/td\u003e\n\u003ctd\u003eOsmo UV-Protection Oil 410\u003c\/td\u003e\n\u003ctd\u003e\nNormally one exceptionally thin maintenance coat once the surface\nis clean and completely dry.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eDo Not Oil Directly over Grey Timber:\u003c\/strong\u003e Applying clear oil\nover a greyed surface normally deepens the grey appearance rather than\nrestoring the original timber colour. Use Wood Reviver Power-Gel before\nrecoating where necessary.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Application Tools\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eApplication Tool\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow It Is Used\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nDoors, windows, cladding, fencing and detailed exterior joinery.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply thinly with the grain and stretch the oil thoroughly into an\neven coating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Microfibre Roller\n\n\u003c\/td\u003e\n\u003ctd\u003e\nLarger smooth gates, doors and flat cladding sections.\n\u003c\/td\u003e\n\u003ctd\u003e\nLoad lightly, distribute the finish evenly and lay off with a brush\nwhere required.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nWood Coating Brushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFrames, rebates, edges, mouldings and difficult details.\n\u003c\/td\u003e\n\u003ctd\u003e\nSelect a suitable brush width and check corners and lower edges for\nruns or pooled oil.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nExtension Poles and Handles\n\n\u003c\/td\u003e\n\u003ctd\u003e\nHigh cladding and larger vertical areas.\n\u003c\/td\u003e\n\u003ctd\u003e\nUse with compatible applicators while maintaining full control over\ncoating thickness and overlap marks.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\nComplete individual boards, doors or panels from end to end wherever\npossible. Maintain a wet edge and avoid stopping halfway through a\nprominent section.\n\u003c\/p\u003e\n\n\u003cp\u003e\nApply exceptionally thinly. Heavy coats will not provide greater UV\nprotection and may cause runs, tackiness, uneven sheen and slow drying.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAccessory\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled application to doors, windows, cladding and fencing.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nEfficient application across larger smooth vertical surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRestoring greyed exterior timber before recoating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nGeneral cleaning and preparation of suitable exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaning Scrub Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWorking exterior cleaner or Reviver Gel into the timber grain.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo WR Base Coat\n\n\u003c\/td\u003e\n\u003ctd\u003e\nAdditional preservative base protection for suitable exterior\ntimber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nDegreasing suitable oily timber and cleaning application tools.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAvailable Sizes\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSize\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Coverage Per Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.75L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 13.5m²\u003c\/td\u003e\n\u003ctd\u003e\nDoors, windows, gates and smaller cladding or fencing projects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e2.5L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 45m²\u003c\/td\u003e\n\u003ctd\u003e\nLarger cladding, pergolas, summerhouses and professional exterior\nprojects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage is based on approximately 18m² per litre for one thin coat on\nsmooth, prepared timber. Rough-sawn, textured, weathered or highly\nabsorbent surfaces may use considerably more product.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eCalculate for Two Coats:\u003c\/strong\u003e New untreated timber normally\nrequires two thin coats. A 2.5L tin may cover up to approximately 45m²\nfor one coat or approximately 22.5m² as a complete two-coat system.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eClear natural oil-based exterior UV-protection finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct number\u003c\/th\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended use\u003c\/th\u003e\n\u003ctd\u003eVertical exterior timber surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable sizes\u003c\/th\u003e\n\u003ctd\u003e0.75L and 2.5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003eTwo exceptionally thin coats on bare timber\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRenovation coat\u003c\/th\u003e\n\u003ctd\u003eNormally one thin coat on a clean and sound existing finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate coverage\u003c\/th\u003e\n\u003ctd\u003eUp to approximately 18m² per litre, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate drying time\u003c\/th\u003e\n\u003ctd\u003eApproximately 12 hours with good ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum timber moisture\u003c\/th\u003e\n\u003ctd\u003eApproximately 20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUV performance\u003c\/th\u003e\n\u003ctd\u003e\nSlows greying by a factor of up to 12 compared with untreated wood\nwhen applied as a complete two-coat system\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eActive film protection\u003c\/th\u003e\n\u003ctd\u003eNo added biocidal film protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication tools\u003c\/th\u003e\n\u003ctd\u003eOsmo Flat Brush or suitable Microfibre Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool cleaning\u003c\/th\u003e\n\u003ctd\u003eOsmo Brush Cleaner \u0026amp; Thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReady to use\u003c\/th\u003e\n\u003ctd\u003eYes – stir thoroughly and do not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse location\u003c\/th\u003e\n\u003ctd\u003eExterior use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage and drying times are approximate. Timber species, porosity,\ntexture, preparation, temperature, humidity, airflow and application\nthickness will influence the result.\n\u003c\/p\u003e\n\n\u003ch2\u003eBest Conditions for Application\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eApply to clean, dry and frost-free timber.\u003c\/li\u003e\n\u003cli\u003eTimber moisture content must not exceed approximately 20%.\u003c\/li\u003e\n\u003cli\u003eChoose a dry weather window with no rain expected during drying.\u003c\/li\u003e\n\u003cli\u003eAvoid application in intense direct sunlight.\u003c\/li\u003e\n\u003cli\u003eDo not coat timber that is excessively hot.\u003c\/li\u003e\n\u003cli\u003eAvoid frost, heavy dew and very high humidity.\u003c\/li\u003e\n\u003cli\u003eProvide good airflow while each coat dries.\u003c\/li\u003e\n\u003cli\u003eAllow the first coat to dry completely before recoating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProtect from Rain and Dew:\u003c\/strong\u003e Moisture reaching the coating\nbefore it has dried can cause marking, patchiness and delayed curing.\nAlways check the forecast before beginning exterior work.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\nEnsure the wood is clean, dry, frost-free and free from dirt, grease,\nalgae and contamination.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTimber moisture content must be below approximately 20%.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow new resinous, ingredient-rich or pressure-treated timber to weather\nuntil it becomes sufficiently absorbent.\n\u003c\/li\u003e\n\n\u003cli\u003e\nThoroughly clean compatible old microporous coatings.\n\u003c\/li\u003e\n\n\u003cli\u003e\nLightly sand worn, rough or uneven areas where necessary.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCompletely remove old paint, varnish, lacquer and incompatible\nfilm-forming coatings.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid sanding smooth exterior timber finer than approximately P120.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRestore greyed timber with\n\nOsmo Wood Reviver Power-Gel\n.\n\u003c\/li\u003e\n\n\u003cli\u003e\nConsider\n\nOsmo WR Base Coat\n\non suitable softwood where additional preservative protection is wanted.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRound sharp exterior edges where practical so the coating can protect\nthem more effectively.\n\u003c\/li\u003e\n\n\u003cli\u003e\nEnsure horizontal sections connected to vertical timber shed water\ncorrectly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove all sanding dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStir the oil thoroughly before and during application.\n\u003c\/li\u003e\n\n\u003cli\u003e\nComplete a representative trial before coating the full area.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProtect All Faces Where Practical:\u003c\/strong\u003e On new doors,\nwindows, cladding and joinery, apply the first coat to all faces, edges\nand end grain before installation wherever practical.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eHow to Apply Osmo UV-Protection Oil 410\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nConfirm that the timber is clean, completely dry and ready to absorb oil.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStir the product thoroughly from the bottom of the tin. Do not thin.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCut in around edges, joints, frames and difficult areas with a suitable\nbrush.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the first coat exceptionally thinly using an\n\nOsmo Flat Brush\n\nor suitable microfibre roller.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork along the timber grain and spread the oil thoroughly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nComplete individual boards, doors or panels from end to end wherever\npossible.\n\u003c\/li\u003e\n\n\u003cli\u003e\nMaintain a wet edge and avoid heavy overlaps.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCheck rebates, joints, lower edges and corners for runs or pooled oil.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRedistribute all visible excess before allowing the finish to dry.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow approximately 12 hours’ drying under suitable conditions.\n\u003c\/li\u003e\n\n\u003cli\u003e\nOnce the first coat is completely dry, apply a second equally thin coat.\n\u003c\/li\u003e\n\n\u003cli\u003e\nProtect the surface from rain, dew, dust and contamination while drying.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\nTwo thin, even coats provide a better result than one heavy application.\nExcess oil will not increase UV performance and may cause runs, stickiness,\nprolonged drying and uneven sheen.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRenovating an Existing Finish\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nInspect the coating for dirt, fading, greying and localised failure.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean the timber thoroughly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nUse Wood Reviver Power-Gel where the wood has already greyed.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the surface to dry completely.\n\u003c\/li\u003e\n\n\u003cli\u003e\nLightly sand loose, rough or uneven areas where required.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove all dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply one exceptionally thin coat where the existing finish remains sound.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhere the coating has worn away or the timber has become bare, apply a\ncomplete two-coat system.\n\u003c\/li\u003e\n\n\u003cli\u003e\nProtect from rain and dew while drying.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eRecoat Before Greying Begins:\u003c\/strong\u003e\u003cbr\u003e\nMaintenance is simplest when one thin coat is applied as soon as the\nsurface begins to look dry or faded. Waiting until the timber has greyed\ncan require cleaning, de-greying and a complete two-coat treatment.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhen Should the Timber Be Recoated?\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eThe timber begins to look dry or faded.\u003c\/li\u003e\n\u003cli\u003eWater no longer beads effectively.\u003c\/li\u003e\n\u003cli\u003eSouth-facing areas become lighter than sheltered surfaces.\u003c\/li\u003e\n\u003cli\u003eThe coating appears thin around edges or exposed sections.\u003c\/li\u003e\n\u003cli\u003eThe finish remains intact but weather resistance is reducing.\u003c\/li\u003e\n\u003cli\u003eNatural greying begins to appear through the clear coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eInspect Clear Finishes Regularly:\u003c\/strong\u003e Clear exterior coatings\ncan show less obvious wear than coloured finishes. Check exposed timber\nat least annually and maintain it before the coating has worn away.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eImportant Application Notes\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse on suitable vertical exterior timber.\u003c\/li\u003e\n\n\u003cli\u003eDo not use as the primary finish for horizontal decking.\u003c\/li\u003e\n\n\u003cli\u003eApply two exceptionally thin coats to bare timber.\u003c\/li\u003e\n\n\u003cli\u003e\nOne thin coat is normally sufficient for renovation where the existing\ncoating remains sound.\n\u003c\/li\u003e\n\n\u003cli\u003eStir thoroughly before and throughout application.\u003c\/li\u003e\n\n\u003cli\u003eDo not thin the product.\u003c\/li\u003e\n\n\u003cli\u003eTimber moisture content must not exceed approximately 20%.\u003c\/li\u003e\n\n\u003cli\u003e\nThe stated UV protection requires a complete two-coat system.\n\u003c\/li\u003e\n\n\u003cli\u003eClear oil will normally enrich and darken timber slightly.\u003c\/li\u003e\n\n\u003cli\u003e\nHeavy application can cause runs, stickiness and prolonged drying.\n\u003c\/li\u003e\n\n\u003cli\u003eAllow approximately 12 hours between coats.\u003c\/li\u003e\n\n\u003cli\u003eProtect the surface from rain and dew while drying.\u003c\/li\u003e\n\n\u003cli\u003eAllow ingredient-rich timber to weather before coating.\u003c\/li\u003e\n\n\u003cli\u003e\nConsider WR Base Coat on suitable softwood where additional protection\nis required.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove paint, varnish and lacquer completely before application.\n\u003c\/li\u003e\n\n\u003cli\u003eAlways complete a representative test area.\u003c\/li\u003e\n\n\u003cli\u003e\nUse Wood Reviver Power-Gel where timber has already become grey.\n\u003c\/li\u003e\n\n\u003cli\u003eRecoat before the existing protection wears away completely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTool Cleaning\u003c\/h2\u003e\n\n\u003cp\u003e\nClean suitable brushes, rollers and reusable application equipment\nimmediately after use with\n\nOsmo Brush Cleaner \u0026amp; Thinner\n.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOil-Soaked Cloth Safety:\u003c\/strong\u003e Cloths, pads and absorbent\nmaterials contaminated with drying oils can generate heat while curing.\nLay them flat outdoors to dry safely or store them in a suitable sealed\nmetal container before disposal in accordance with the product safety\ninformation.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eComplete Your Osmo Exterior System\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo UV-Protection Oil Extra\n\n\u003c\/td\u003e\n\u003ctd\u003e\nClear exterior protection with additional active film protection\nagainst mould, algae and fungal attack.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo UV-Protection Oil Tints\n\n\u003c\/td\u003e\n\u003ctd\u003e\nTransparent coloured protection for vertical exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThin and controlled application to doors, windows and cladding.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nEfficient application across larger smooth vertical surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Wood Reviver Power-Gel\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRemoving grey weathering before recoating exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nGeneral cleaning and preparation of suitable exterior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Cleaning Scrub Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWorking cleaner or Wood Reviver into timber grain and texture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo WR Base Coat\n\n\u003c\/td\u003e\n\u003ctd\u003e\nOptional preservative base protection for suitable exterior\nsoftwood.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nDegreasing suitable oily timber and cleaning application tools.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Decking Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nProtection for horizontal decking and exterior walking surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"0.75L","offer_id":44662147580007,"sku":"ymv1789815882979","price":25.05,"currency_code":"USD","in_stock":true},{"title":"2.5L","offer_id":44662147612775,"sku":"jwm1789815882980","price":74.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/9109\/5911\/files\/osmo-uv-protection-oil-410-clear-exterior-wood-oil_1.jpg?v=1789815889","url":"https:\/\/yearroundseamwear.shop\/products\/osmo-uv-protection-oil-410-clear-exterior-wood-oil","provider":"My Store","version":"1.0","type":"link"}