{"product_id":"osmo-polyx-oil-effect-raw-matt-3044","title":"Osmo Polyx Oil Effect- Raw Matt (3044)","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n\u003cdiv class=\"wwfs-product-intro\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOsmo Polyx-Oil Effect Raw 3044\u003c\/strong\u003e is a lightly\nwhite-pigmented matt hardwax oil designed to protect pale interior timber\nwhile preserving the appearance of freshly sanded, untreated wood.\n\u003c\/p\u003e\n\n\u003cp\u003e\nUnlike conventional clear oils, which normally enrich and darken timber,\nPolyx-Oil Effect Raw uses carefully balanced white pigments to counteract\nthe usual permanent wet-look effect. This keeps oak and other\nlight-coloured woods looking lighter, calmer and much closer to their\nnatural raw appearance.\n\u003c\/p\u003e\n\n\u003cp\u003e\nOnce correctly applied, the finish is extremely durable, water-repellent,\ndirt-resistant and resistant to common household spillages. It remains\nmicroporous and breathable and will not crack, peel, blister or flake.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWiltshire Wood Recommendation:\u003c\/strong\u003e\u003cbr\u003e\nChoose Polyx-Oil Effect Raw when you want the protection of an Osmo\nhardwax oil without significantly warming or darkening pale oak and other\nlight timber.\n\u003c\/p\u003e\n\n\u003cp\u003e\nConsistent application is particularly important because Raw contains\nwhite pigment. Apply exceptionally thin coats, work methodically and lay\nthe finish off evenly with an\n\nOsmo Floor Brush\n.\nNever leave heavy areas or visible white pigment to dry on the surface.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eNearly Invisible Protection for Pale Wood\u003c\/h2\u003e\n\n\u003cp\u003e\nClear oils normally make timber look darker and richer, similar to the\nappearance of wood when it is damp. This is commonly known as the\n\u003cstrong\u003epermanent wet-look effect\u003c\/strong\u003e.\n\u003c\/p\u003e\n\n\u003cp\u003e\nPolyx-Oil Effect Raw 3044 contains a controlled amount of white pigment\ndesigned to neutralise this colour change. The pigment is not intended to\ncreate an obviously white floor; it helps pale timber retain the light,\nnatural appearance it had immediately after sanding.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eThin and Consistent Application Is Essential:\u003c\/strong\u003e Applying\nRaw too heavily can leave white, cloudy or chalky patches. It is always\nbetter to apply multiple exceptionally thin, even coats than one heavy\ncoat. Remove or redistribute visible white pigment before allowing the\nfinish to dry.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhy Choose Osmo Polyx-Oil Effect Raw?\u003c\/h2\u003e\n\n\u003cul class=\"wwfs-benefit-list\"\u003e\n\u003cli\u003eNearly invisible protection for light-coloured interior wood\u003c\/li\u003e\n\u003cli\u003eHelps pale timber remain pale after oiling\u003c\/li\u003e\n\u003cli\u003eReduces the usual amber or wet-look effect of clear oils\u003c\/li\u003e\n\u003cli\u003eCreates a natural, freshly sanded appearance\u003c\/li\u003e\n\u003cli\u003eMatt finish with minimal visible sheen\u003c\/li\u003e\n\u003cli\u003eExtremely durable and hardwearing\u003c\/li\u003e\n\u003cli\u003eVery water-repellent and dirt-resistant\u003c\/li\u003e\n\u003cli\u003eResistant to common household liquid spillages\u003c\/li\u003e\n\u003cli\u003eSuitable for wooden floors, furniture and interior joinery\u003c\/li\u003e\n\u003cli\u003eSuitable for solid, engineered and parquet flooring\u003c\/li\u003e\n\u003cli\u003eMicroporous and breathable finish\u003c\/li\u003e\n\u003cli\u003eWill not crack, blister, peel or flake\u003c\/li\u003e\n\u003cli\u003eCan be repaired or refreshed locally\u003c\/li\u003e\n\u003cli\u003eSaliva-resistant and sweatproof once dry\u003c\/li\u003e\n\u003cli\u003eSuitable for children’s toys in accordance with EN 71.3\u003c\/li\u003e\n\u003cli\u003eEasy to clean and maintain with the Osmo care system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich Osmo Oil Is Right for Me?\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOsmo Finish\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKey Difference\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Original\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFloors, furniture, staircases and general interior timber where a\ntraditional oiled appearance is wanted.\n\u003c\/td\u003e\n\u003ctd\u003e\nClear oil that enriches and warms the natural colour of timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Rapid\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFloors and furniture where the coating programme needs to be\ncompleted more quickly.\n\u003c\/td\u003e\n\u003ctd\u003e\nFast-drying clear protection, allowing two coats in one day under\nsuitable conditions.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Tints\n\n\u003c\/td\u003e\n\u003ctd\u003e\nAdding a visible transparent colour while retaining the timber\ngrain.\n\u003c\/td\u003e\n\u003ctd\u003e\nAvailable in White, Light Grey, Honey, Amber, Terra, Graphite and\nBlack.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003ePolyx-Oil Effect Raw 3044\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nPale oak and other light-coloured woods where a freshly sanded,\nuntreated appearance is required.\n\u003c\/td\u003e\n\u003ctd\u003e\nContains subtle white pigment to counteract the usual darkening\ncaused by clear oil.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Door-Oil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nInterior wooden doors, including suitable solid and veneered door\nconstructions.\n\u003c\/td\u003e\n\u003ctd\u003e\nPurpose-designed finish for internal doors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo TopOil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nKitchen worktops, tables, desks, shelving and wooden furniture.\n\u003c\/td\u003e\n\u003ctd\u003e\nFood-safe and highly water-repellent protection for work surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003ePolyx-Oil Effect Raw vs Polyx-Oil Original\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eEffect Raw 3044\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePolyx-Oil Original\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour change\u003c\/td\u003e\n\u003ctd\u003e\nHelps minimise warming and darkening.\n\u003c\/td\u003e\n\u003ctd\u003e\nEnriches and deepens the natural timber colour.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003e\nPale, raw and close to freshly sanded wood.\n\u003c\/td\u003e\n\u003ctd\u003e\nTraditional warm, naturally oiled appearance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePigmentation\u003c\/td\u003e\n\u003ctd\u003e\nContains carefully balanced white pigment.\n\u003c\/td\u003e\n\u003ctd\u003e\nClear matt or clear satin finish.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBest suited to\u003c\/td\u003e\n\u003ctd\u003e\nPale oak, ash, maple, birch, pine and similar light woods.\n\u003c\/td\u003e\n\u003ctd\u003e\nMost suitable absorbent interior timber where natural enrichment is\nwanted.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eApplication difficulty\u003c\/td\u003e\n\u003ctd\u003e\nRequires particularly thin and consistent application.\n\u003c\/td\u003e\n\u003ctd\u003e\nMore forgiving where minor colour enrichment is acceptable.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWhich Appearance Do You Prefer?\u003c\/strong\u003e\u003cbr\u003e\nChoose Polyx-Oil Effect Raw if you want pale timber to remain close to\nits freshly sanded colour. Choose\n\nPolyx-Oil Original\n\nif you prefer warmer oak tones and a more traditional oiled appearance.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eUsing Raw 3044 over Polyx-Oil Tints 3040 White\u003c\/h2\u003e\n\n\u003cp\u003e\nClear oils can warm a pale or white-tinted floor and may introduce a\nslightly yellow tone. Where a floor has received\n\nPolyx-Oil Tints 3040 White\n,\nPolyx-Oil Effect Raw can sometimes be used as the protective topcoat to\nhelp maintain a lighter appearance.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eAlways Complete a Full System Test:\u003c\/strong\u003e The white pigment in\nthe tint and the white pigment in Raw can build together. Apply both\nproducts on a representative test area using the intended sanding,\napplication tools and number of coats. Only proceed when you are happy\nwith the dried colour and overall pigment level.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\nOn flooring, apply the white tint exceptionally thinly and allow it to dry\ncompletely. Apply Raw 3044 equally thinly over the top, keeping the\napplication consistent and removing any visible excess pigment before\ndrying.\n\u003c\/p\u003e\n\n\u003ch2\u003eSuitable Timber\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTimber\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSuitability\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eExpected Result\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEuropean oak\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eHighly suitable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nHelps maintain a pale, freshly sanded oak appearance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eAsh\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eHighly suitable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nPreserves the naturally light colour and visible grain.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eMaple\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nHelps minimise warming on clean, evenly sanded timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBirch\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nMaintains a pale appearance, although absorption can vary.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePine and spruce\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nReduces yellowing, but white pigment may emphasise knots and grain.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eSmoked or fumed oak\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eGenerally unsuitable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nWhite pigment may appear misty, cloudy or chalky.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eWalnut and dark hardwoods\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eGenerally unsuitable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nWhite pigment is likely to remain visibly pale on the surface.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eWenge, Merbau and Jatoba\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eAlternative system recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nExtractives and dark colour can interfere with appearance and\ndrying.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nTimber varies naturally. Always complete a representative trial on the\nactual wood before treating the full area.\n\u003c\/p\u003e\n\n\u003ch2\u003eSuitable Surfaces\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eLight-coloured solid wood flooring\u003c\/li\u003e\n\u003cli\u003eEngineered flooring with a suitable absorbent timber wear layer\u003c\/li\u003e\n\u003cli\u003eOak plank flooring\u003c\/li\u003e\n\u003cli\u003eParquet and herringbone flooring\u003c\/li\u003e\n\u003cli\u003ePale wooden furniture\u003c\/li\u003e\n\u003cli\u003eTables, desks and shelving\u003c\/li\u003e\n\u003cli\u003eSolid timber staircases\u003c\/li\u003e\n\u003cli\u003eStair treads and risers\u003c\/li\u003e\n\u003cli\u003eHandrails, newel posts and spindles\u003c\/li\u003e\n\u003cli\u003eSkirting boards and architraves\u003c\/li\u003e\n\u003cli\u003eWall and ceiling panelling\u003c\/li\u003e\n\u003cli\u003eSuitable interior doors and joinery\u003c\/li\u003e\n\u003cli\u003ePreviously treated Raw surfaces following suitable preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eInterior Use Only:\u003c\/strong\u003e Polyx-Oil Effect Raw is intended for\nsuitable untreated or sanded interior timber. It is not an exterior\ndecking, cladding or garden-furniture finish.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTextured and Brushed Timber\u003c\/h2\u003e\n\n\u003cp\u003e\nWhite pigment naturally settles into open grain, deep texture, brushing,\nsaw marks and sanding scratches. Raw 3044 can therefore appear visibly\nwhiter on textured timber than it does on smoothly and consistently sanded\nwood.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSurface Texture\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePossible Effect\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommendation\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmoothly sanded flooring\u003c\/td\u003e\n\u003ctd\u003e\nMost even and nearly invisible appearance.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply exceptionally thinly and lay off consistently.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eWire-brushed oak\u003c\/td\u003e\n\u003ctd\u003e\nWhite pigment may remain more visible in the open grain.\n\u003c\/td\u003e\n\u003ctd\u003e\nTrial the complete system before application.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBand-sawn or heavily textured timber\u003c\/td\u003e\n\u003ctd\u003e\nPigment may collect in deeper marks and create a stronger white\neffect.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply very sparingly and test on a representative section.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eCoarsely sanded timber\u003c\/td\u003e\n\u003ctd\u003e\nSanding scratches may become highlighted by white pigment.\n\u003c\/td\u003e\n\u003ctd\u003e\nComplete a consistent final sanding sequence before coating.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Application Tools\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eApplication Tool\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow It Is Used\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Floor Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled application and final laying-off across wooden floors.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply with the grain and stretch the product into a very thin,\nconsistent layer. Use the brush to remove heavy marks and visible\npigment.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Microfibre Roller\n\n\u003c\/td\u003e\n\u003ctd\u003e\nApplying the product efficiently across larger open floor areas.\n\u003c\/td\u003e\n\u003ctd\u003e\nRoller the product on exceptionally thinly, then lay it off with\nthe Osmo Floor Brush for a more consistent finish.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nHand Pad Holder and White Pad\n\n\u003c\/td\u003e\n\u003ctd\u003e\nBuffing Raw thinly into smaller surfaces or controlling pigment.\n\u003c\/td\u003e\n\u003ctd\u003e\nWork the product evenly into the timber with a white pad and remove\nall excess. Effective but labour-intensive on larger floors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nWood Coating Brushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nEdges, staircases, furniture, skirting and detailed joinery.\n\u003c\/td\u003e\n\u003ctd\u003e\nChoose an appropriate brush width and apply sparingly, checking\nmouldings and corners for white pigment build-up.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOur Preferred Floor Method:\u003c\/strong\u003e\u003cbr\u003e\nFor many floor areas, apply Raw using a suitable microfibre roller, then\nimmediately lay the finish off along the grain with an\n\nOsmo Floor Brush\n.\nThis combines efficient application with the control needed to distribute\nthe white pigment evenly.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe finish can also be buffed in with a white pad. This can produce a very\ncontrolled, thin application, but it is considerably more labour-intensive\nover large areas.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAccessory\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Floor Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nApplying and laying off Raw evenly along the timber grain.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThin microfibre roller application across larger open areas.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nHand Pad Holder and Accessories\n\n\u003c\/td\u003e\n\u003ctd\u003e\nHand application and controlled buffing with a white pad.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nApplication and Buffing Pads\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWhite pads for buffing the product thinly and removing excess.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nBrushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCutting in, stairs, furniture, skirting and detailed components.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable brushes, rollers and tools immediately after use.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAvailable Sizes\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSize\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Coverage Per Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5ml Sample Sachet\u003c\/td\u003e\n\u003ctd\u003eSmall test area\u003c\/td\u003e\n\u003ctd\u003e\nChecking the colour, pigment level and appearance on the actual\ntimber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e0.75L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 22.5m²\u003c\/td\u003e\n\u003ctd\u003e\nSmaller floors, stairs, furniture and joinery projects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e2.5L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 75m²\u003c\/td\u003e\n\u003ctd\u003e\nMedium to large flooring areas and professional projects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage is based on approximately 30m² per litre for one thin coat. Actual\ncoverage will vary according to timber species, porosity, texture, sanding,\napplication method and the amount applied.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eCalculate for Two Coats:\u003c\/strong\u003e New bare timber will normally\nrequire two exceptionally thin coats. A 2.5L tin may cover up to\napproximately 75m² for one coat or approximately 37.5m² as a complete\ntwo-coat system.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eLightly white-pigmented interior hardwax oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003e3044 Raw\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheen\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eNearly invisible, freshly sanded timber effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable sizes\u003c\/th\u003e\n\u003ctd\u003e5ml sample sachet, 0.75L and 2.5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003eTwo exceptionally thin coats on bare pale timber\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRenovation coat\u003c\/th\u003e\n\u003ctd\u003e\nNormally one thin coat on a clean and suitably prepared Raw surface\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate coverage\u003c\/th\u003e\n\u003ctd\u003eUp to approximately 30m² per litre, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate drying time\u003c\/th\u003e\n\u003ctd\u003eApproximately 24 hours with good ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate full cure\u003c\/th\u003e\n\u003ctd\u003eApproximately 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum timber moisture\u003c\/th\u003e\n\u003ctd\u003eApproximately 18%\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication tools\u003c\/th\u003e\n\u003ctd\u003e\nOsmo Floor Brush, Flat Brush, Microfibre Roller or white pad\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool cleaning\u003c\/th\u003e\n\u003ctd\u003eOsmo Brush Cleaner \u0026amp; Thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse location\u003c\/th\u003e\n\u003ctd\u003eSuitable pale interior timber surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReady to use\u003c\/th\u003e\n\u003ctd\u003eYes – stir thoroughly and do not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish characteristics\u003c\/th\u003e\n\u003ctd\u003e\nMicroporous, water-repellent, dirt-resistant and\nabrasion-resistant\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage, drying and curing times are approximate. Temperature, humidity,\nventilation, timber species, texture and application thickness will affect\nthe result.\n\u003c\/p\u003e\n\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\nEnsure the timber is clean, dry, frost-free and free from grease, wax,\ndirt and contamination.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTimber moisture content must not exceed approximately 18%.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCompletely remove paint, varnish, lacquer and other film-forming finishes.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRepair or replace loose, damaged or unstable timber before sanding.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCountersink protruding nails, pins and other fixings.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFill suitable cracks, holes and defects before completing the final\nsanding sequence.\n\u003c\/li\u003e\n\n\u003cli\u003e\nSand the complete surface consistently back to clean, absorbent timber.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFor flooring, normally complete the final sanding at approximately\nP120–P150, subject to timber species and the required appearance.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFor furniture and fine joinery, a finer final sanding sequence may be\nsuitable.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid leaving coarse sanding scratches that may be highlighted by the\nwhite pigment.\n\u003c\/li\u003e\n\n\u003cli\u003e\nVacuum thoroughly, including floor joints, edges, corners and mouldings.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStir the product thoroughly from the bottom of the tin before and during\napplication.\n\u003c\/li\u003e\n\n\u003cli\u003e\nComplete a representative trial application before treating the full\nsurface.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eConsistent Sanding Is Critical:\u003c\/strong\u003e Variations in sanding\ngrit or surface texture will affect pigment absorption. Coarser areas may\nappear noticeably whiter, while highly polished sections may absorb less\nproduct.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFloor Application\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nBring the product to normal room temperature and stir thoroughly. Do not\nthin.\n\u003c\/li\u003e\n\n\u003cli\u003e\nEnsure the floor is completely clean, dry and free from sanding dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCut in around edges, corners, door frames and thresholds using a suitable\nbrush.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the first coat exceptionally thinly using an\n\nOsmo Floor Brush\n\nor a suitable microfibre roller.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhere using a roller, lay the product off immediately along the grain with\nthe Osmo Floor Brush.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork methodically in manageable sections and maintain a wet edge.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStretch the product thoroughly and avoid heavy overlaps, roller edges,\npuddles or thick brush marks.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCheck the surface from several angles while wet.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove or redistribute any visible white pigment before allowing the\nfinish to dry.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAny brush marks can be gently laid off with a clean, dry microfibre roller\nwhile the product remains workable.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the first coat to dry for approximately 24 hours with good\nventilation.\n\u003c\/li\u003e\n\n\u003cli\u003e\nOnce fully dry, apply a second exceptionally thin and consistent coat.\n\u003c\/li\u003e\n\n\u003cli\u003e\nContinue ventilating throughout drying and curing.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid rugs, mats and protective coverings during the curing period.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\nDo not try to achieve the complete protective build with one heavy coat.\nThin, controlled coats produce a much cleaner and more consistent result.\nHeavy application increases the likelihood of white patches, cloudy areas\nand slow drying.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eBuffing Application with a White Pad\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nApply a small quantity of Raw to the prepared timber.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork it evenly into the surface using a clean white pad.\n\u003c\/li\u003e\n\n\u003cli\u003e\nContinue buffing until the product is distributed into an extremely thin\nand consistent film.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove all visible excess and pigment build-up.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork section by section and blend adjoining areas carefully.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow approximately 24 hours’ drying before applying the next coat.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nWhite-pad application provides excellent control but can be\nlabour-intensive over larger floor areas. A roller followed by laying off\nwith the Osmo Floor Brush is often more practical for a full room.\n\u003c\/p\u003e\n\n\u003ch2\u003eApplying to Stairs, Furniture and Joinery\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nPrepare and sand the timber evenly, then remove all dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nStir thoroughly to distribute the white pigment.\n\u003c\/li\u003e\n\n\u003cli\u003e\nSelect a suitable brush or white-pad applicator for the component.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply exceptionally thinly with the grain.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTake particular care around mouldings, joints, corners and end grain,\nwhere pigment may collect.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCheck vertical surfaces for runs and white deposits.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove or redistribute visible excess immediately.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow approximately 24 hours’ drying with good ventilation.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the second coat equally thinly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply no more than one exceptionally thin cloth coat inside cabinets and\ndrawers.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eDrying and Curing\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eStage\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Time\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eGuidance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBetween coats\u003c\/td\u003e\n\u003ctd\u003eApproximately 24 hours\u003c\/td\u003e\n\u003ctd\u003e\nThe first coat must be fully dry before applying the second.\nMaintain good ventilation.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eLight use\u003c\/td\u003e\n\u003ctd\u003eOnce the final coat has dried\u003c\/td\u003e\n\u003ctd\u003e\nKeep traffic light and avoid spillages, wet cleaning and excessive\nabrasion.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003eApproximately 2–3 weeks\u003c\/td\u003e\n\u003ctd\u003e\nAvoid rugs, mats, protective sheeting and wet cleaning during this\nperiod.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eDo Not Cover While Curing:\u003c\/strong\u003e Osmo oils cure through\noxidation and require airflow. Covering the surface can delay curing and\nmay cause visible colour or sheen differences.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCleaning and Maintenance\u003c\/h2\u003e\n\n\u003cp\u003e\nA correctly applied Raw surface can be routinely cleaned, refreshed and\nlocally renovated without automatically sanding the entire floor.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMaintenance Stage\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRegular dry cleaning\u003c\/td\u003e\n\u003ctd\u003eVacuum cleaner, soft broom or Osmo Dust Mop\u003c\/td\u003e\n\u003ctd\u003e\nRemoves grit, dust and debris that could scratch or dull the finish.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eRoutine damp cleaning\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Wash \u0026amp; Care\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRoutine cleaning of oiled and waxed timber without aggressive\nhousehold detergents.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eComplete maintenance kit\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Floor Maintenance Kit\n\n\u003c\/td\u003e\n\u003ctd\u003e\nSuitable cleaning and care products for maintaining an Osmo-treated\nfloor.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePeriodic refreshing\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Maintenance Oil 3079 Clear Matt\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRefreshes protection where the pale colour and Raw appearance\nremain intact.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eIntensive cleaning\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Intensive Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRemoves heavier contamination before suitable maintenance or\nrenovation.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\nVacuum or sweep before damp cleaning. Use a well-wrung mop and avoid\nflooding the timber. Wipe up liquid spillages promptly and never allow\nstanding water to remain on the surface.\n\u003c\/p\u003e\n\n\u003ch2\u003eRenovating a Raw-Finished Surface\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nVacuum thoroughly to remove grit, dust and loose debris.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean the surface using a suitable Osmo cleaning product.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the timber to dry completely.\n\u003c\/li\u003e\n\n\u003cli\u003e\nInspect whether the timber remains pale and evenly protected.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhere the appearance remains consistent but water repellency has reduced,\napply Osmo Maintenance Oil 3079 Clear Matt exceptionally thinly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhere slight wear is visible, clean and prepare the surface before\napplying one thin coat of Raw 3044.\n\u003c\/li\u003e\n\n\u003cli\u003e\nDo not apply Raw directly over dirty, bare timber, as contaminated timber\nmay absorb oil differently and become noticeably darker.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFeather local repairs carefully into the surrounding surface.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAlways trial the repair method before treating a prominent area.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eLocal Repair Advice:\u003c\/strong\u003e\u003cbr\u003e\nRaw finishes can be repaired locally, but colour matching requires care.\nTimber exposed through wear may have become dirty, aged or affected by\nsunlight. Clean and test the area before recoating to avoid a darker or\nwhiter repair patch.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eImportant Application Notes\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse on suitable pale interior timber only.\u003c\/li\u003e\n\n\u003cli\u003eStir thoroughly before and throughout application.\u003c\/li\u003e\n\n\u003cli\u003eDo not thin the product.\u003c\/li\u003e\n\n\u003cli\u003eApply two exceptionally thin coats to new bare timber.\u003c\/li\u003e\n\n\u003cli\u003e\nApply fewer heavy coats only at the risk of white patches, cloudy areas\nand delayed drying.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove or redistribute all visible white pigment before allowing the\nsurface to dry.\n\u003c\/li\u003e\n\n\u003cli\u003e\nLay the coating off consistently along the timber grain.\n\u003c\/li\u003e\n\n\u003cli\u003e\nA suitable roller can be used for application before laying off with the\nOsmo Floor Brush.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhite-pad application provides good control but is slow on large areas.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCoarse, wire-brushed and textured surfaces may appear more visibly white.\n\u003c\/li\u003e\n\n\u003cli\u003e\nConsistent sanding is essential for an even colour and pigment level.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRaw is not suitable for dark, reddish, smoked or fumed timber without a\nsuccessful trial application.\n\u003c\/li\u003e\n\n\u003cli\u003e\nExtractive-rich hardwoods may require Osmo Wood Wax Finish Clear Extra\nThin.\n\u003c\/li\u003e\n\n\u003cli\u003e\nPoor ventilation and excessive application will delay drying.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply no more than one exceptionally thin cloth coat inside cabinets and\ndrawers.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAlways trial the complete system when applying Raw over 3040 White.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid general household detergents, washing-up liquid, steam cleaners and\nexcessive water.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTool Cleaning\u003c\/h2\u003e\n\n\u003cp\u003e\nClean suitable brushes, rollers and application equipment immediately\nafter use with\n\nOsmo Brush Cleaner \u0026amp; Thinner\n.\n\u003c\/p\u003e\n\n\u003cp\u003e\nDo not reuse applicators containing darker or strongly pigmented products\nunless they have been cleaned thoroughly, as residual pigment may affect\nthe final Raw appearance.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOil-Soaked Cloth Safety:\u003c\/strong\u003e Cloths, pads and absorbent\nmaterials contaminated with drying oils can generate heat while curing.\nLay them flat outdoors to dry safely or store them in an appropriate\nsealed metal container before disposal in accordance with the product\nsafety information.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eComplete Your Osmo System\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Tints 3040 White\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCreating a more visibly white effect before applying a carefully\ntested Raw topcoat where appropriate.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Floor Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nApplying and laying off Raw consistently along the timber grain.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nEfficient thin application over larger floor areas before laying\noff with the Floor Brush.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nHand Pad Holder and Accessories\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled white-pad application and buffing on smaller areas.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nApplication and Buffing Pads\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWhite pads for buffing the finish thinly and removing excess.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nWood Coating Brushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCutting in, staircases, furniture, skirting and detailed joinery.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable application equipment immediately after use.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Wash \u0026amp; Care\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRoutine damp cleaning of completed Raw finishes.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Maintenance Oil 3079 Clear Matt\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRefreshing protection where the pale Raw appearance remains intact.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Intensive Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nIntensive cleaning before maintenance or renovation.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"5ml Sample Sachet","offer_id":44661988360295,"sku":"bvl1789815615407","price":3.94,"currency_code":"USD","in_stock":true},{"title":"0.75L","offer_id":44661988393063,"sku":"gyk1789815615408","price":31.13,"currency_code":"USD","in_stock":true},{"title":"2.5L","offer_id":44661988425831,"sku":"xjt1789815615409","price":94.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/9109\/5911\/files\/osmo-polyx-oil-effect--raw-matt-3044_1.png?v=1789815621","url":"https:\/\/yearroundseamwear.shop\/products\/osmo-polyx-oil-effect-raw-matt-3044","provider":"My Store","version":"1.0","type":"link"}