{"product_id":"osmo-door-oil-1l","title":"Osmo Door Oil 1L","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n\u003cdiv class=\"wwfs-product-intro\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOsmo Door-Oil\u003c\/strong\u003e is a specialist oil-and-wax finish\ndeveloped for solid timber doors, selected veneered doors, door frames\nand interior joinery.\n\u003c\/p\u003e\n\n\u003cp\u003e\nIts formulation penetrates into the timber while remaining microporous\nand breathable, helping to protect frequently handled wooden surfaces\nagainst dirt, moisture and everyday wear. The dried finish will not\ncrack, peel, blister or flake and helps prevent the timber fibres from\nbecoming dry and brittle over time.\n\u003c\/p\u003e\n\n\u003cp\u003e\nAvailable in \u003cstrong\u003e3060 Clear Satin\u003c\/strong\u003e and\n\u003cstrong\u003e3033 Raw Matt\u003c\/strong\u003e, Osmo Door-Oil can either enrich the\nnatural colour of the wood or help pale timber retain a lighter,\nfreshly sanded appearance.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eWiltshire Wood Recommendation:\u003c\/strong\u003e\u003cbr\u003e\nChoose Osmo Door-Oil for interior wooden doors rather than using a\ngeneral-purpose floor or furniture oil. It is particularly useful for\nselected veneered doors, where a suitable low-build, breathable finish\nis required.\n\u003c\/p\u003e\n\n\u003cp\u003e\nApply two exceptionally thin and even coats. For 3033 Raw Matt, shake and\nmix the product thoroughly, then remove or redistribute any visible white\npigment before allowing the surface to dry.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecialist Protection for Interior Wooden Doors\u003c\/h2\u003e\n\n\u003cp\u003e\nDoors are exposed to regular handling, fingerprints, cleaning, movement\nand changes in indoor humidity. Osmo Door-Oil protects the timber without\nenclosing it beneath a brittle surface film.\n\u003c\/p\u003e\n\n\u003cp\u003e\nThe cured finish remains elastic and microporous, allowing the wood to\nbreathe naturally while reducing the risk of the surface becoming dry,\nbrittle or difficult to maintain.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eVeneered Door Approval:\u003c\/strong\u003e Always check the door\nmanufacturer’s instructions before sanding or coating a veneered door.\nVeneers can be extremely thin, and some door manufacturers specify\nparticular preparation methods or finishes.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhy Choose Osmo Door-Oil?\u003c\/h2\u003e\n\n\u003cul class=\"wwfs-benefit-list\"\u003e\n\u003cli\u003eDeveloped specifically for interior wooden doors\u003c\/li\u003e\n\u003cli\u003eSuitable for solid timber and selected veneered doors\u003c\/li\u003e\n\u003cli\u003eSuitable for door frames, linings and interior joinery\u003c\/li\u003e\n\u003cli\u003eExtremely water-repellent and dirt-resistant\u003c\/li\u003e\n\u003cli\u003eDurable protection for frequently handled timber\u003c\/li\u003e\n\u003cli\u003eMicroporous and breathable finish\u003c\/li\u003e\n\u003cli\u003eWill not crack, peel, blister or flake\u003c\/li\u003e\n\u003cli\u003eHelps prevent timber fibres becoming dry and brittle\u003c\/li\u003e\n\u003cli\u003eSupports the natural elasticity of the timber surface\u003c\/li\u003e\n\u003cli\u003eEasy to clean and maintain\u003c\/li\u003e\n\u003cli\u003eCan normally be refreshed without complete sanding\u003c\/li\u003e\n\u003cli\u003eSaliva-resistant and sweatproof once dry\u003c\/li\u003e\n\u003cli\u003eSuitable for children’s toys in accordance with EN 71.3\u003c\/li\u003e\n\u003cli\u003eAvailable in warm Clear Satin and nearly invisible Raw Matt\u003c\/li\u003e\n\u003cli\u003eApproximately 24m² coverage per litre, per coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhich Osmo Oil Is Right for Me?\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOsmo Finish\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKey Difference\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Original\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWooden floors, staircases, furniture and general absorbent interior\ntimber.\n\u003c\/td\u003e\n\u003ctd\u003e\nGeneral-purpose high-solid hardwax oil designed particularly for\nflooring and interior woodwork.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Rapid\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFloors and furniture where a faster coating programme is required.\n\u003c\/td\u003e\n\u003ctd\u003e\nFast-drying clear protection that can allow two coats in one day.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Tints\n\n\u003c\/td\u003e\n\u003ctd\u003e\nAdding transparent colour to solid timber floors, furniture and\nsuitable joinery.\n\u003c\/td\u003e\n\u003ctd\u003e\nColoured oil system available in a range of transparent shades.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Effect Raw\n\n\u003c\/td\u003e\n\u003ctd\u003e\nPale floors and furniture where a freshly sanded appearance is\nrequired.\n\u003c\/td\u003e\n\u003ctd\u003e\nWhite-pigmented floor and furniture finish that reduces the usual\nwarming caused by clear oil.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo TopOil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nWooden kitchen worktops, dining tables, desks, shelving and\nfurniture.\n\u003c\/td\u003e\n\u003ctd\u003e\nFood-safe finish developed specifically for wooden work surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eOsmo Door-Oil\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nInterior wooden doors, frames, linings and suitable joinery.\n\u003c\/td\u003e\n\u003ctd\u003e\nPurpose-designed finish for solid and selected veneered doors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eChoose Your Finish\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFinish\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eAppearance\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3060 Clear Satin\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nA warm, clear finish that enriches the grain and natural colour of\nthe timber with a subtle satin sheen.\n\u003c\/td\u003e\n\u003ctd\u003e\nOak and other suitable woods where a traditional, richer oiled\nappearance is wanted.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3033 Raw Matt\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\nA lightly white-pigmented matt finish that helps pale timber retain\na light, nearly untreated appearance.\n\u003c\/td\u003e\n\u003ctd\u003e\nPale oak, ash and other light-coloured woods where minimal colour\nchange is preferred.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eClear Satin Enriches the Timber:\u003c\/strong\u003e Door-Oil 3060 creates a\npermanent wet-look effect, making the wood appear warmer, richer and\ndarker than freshly sanded timber.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eRaw Matt Contains White Pigment:\u003c\/strong\u003e Door-Oil 3033 Raw\ncounteracts the usual darkening caused by clear oil. Apply it\nexceptionally thinly and remove visible pigment before drying. Heavy\napplication can leave a pale, cloudy or chalky appearance.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eDoor-Oil 3060 Clear Satin vs 3033 Raw Matt\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e3060 Clear Satin\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e3033 Raw Matt\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour effect\u003c\/td\u003e\n\u003ctd\u003eWarms and enriches the timber.\u003c\/td\u003e\n\u003ctd\u003eHelps pale timber remain light.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eSheen\u003c\/td\u003e\n\u003ctd\u003eSubtle satin.\u003c\/td\u003e\n\u003ctd\u003eLow-sheen matt.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePigmentation\u003c\/td\u003e\n\u003ctd\u003eClear.\u003c\/td\u003e\n\u003ctd\u003eLightly white pigmented.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBest suited to\u003c\/td\u003e\n\u003ctd\u003eTimber where natural colour enrichment is wanted.\u003c\/td\u003e\n\u003ctd\u003ePale timber where a nearly untreated look is wanted.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eApplication care\u003c\/td\u003e\n\u003ctd\u003eApply thinly and evenly.\u003c\/td\u003e\n\u003ctd\u003eApply especially thinly and remove visible white pigment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSuitable Surfaces\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eSolid timber interior doors\u003c\/li\u003e\n\u003cli\u003eSelected veneered interior doors\u003c\/li\u003e\n\u003cli\u003eOak doors\u003c\/li\u003e\n\u003cli\u003ePine doors\u003c\/li\u003e\n\u003cli\u003eAsh and other suitable light timber doors\u003c\/li\u003e\n\u003cli\u003eDoor frames and linings\u003c\/li\u003e\n\u003cli\u003eArchitraves\u003c\/li\u003e\n\u003cli\u003eWardrobe doors\u003c\/li\u003e\n\u003cli\u003eCupboard doors\u003c\/li\u003e\n\u003cli\u003eInterior timber panels\u003c\/li\u003e\n\u003cli\u003eSuitable wooden furniture\u003c\/li\u003e\n\u003cli\u003eGeneral interior joinery\u003c\/li\u003e\n\u003cli\u003ePreviously Door-Oil-treated surfaces following suitable preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eInterior Use Only:\u003c\/strong\u003e Osmo Door-Oil is intended for\ninterior wooden doors, frames and joinery. It is not designed as an\nexterior entrance-door, window, cladding or garden-furniture finish.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eBefore Oiling a Veneered Door\u003c\/h2\u003e\n\n\u003cp\u003e\nVeneered doors require more care than solid timber because the visible wood\nlayer may be extremely thin.\n\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eCheck the door manufacturer’s finishing instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm that oil finishing is permitted.\u003c\/li\u003e\n\u003cli\u003eConfirm whether sanding or renovation is allowed.\u003c\/li\u003e\n\u003cli\u003eAvoid aggressive sanding that may cut through the veneer.\u003c\/li\u003e\n\u003cli\u003eDo not assume both faces use the same veneer construction.\u003c\/li\u003e\n\u003cli\u003eComplete a trial application in an inconspicuous area where possible.\u003c\/li\u003e\n\u003cli\u003eDo not coat over glue, silicone, polish or factory contamination.\u003c\/li\u003e\n\u003cli\u003eApply the finish exceptionally thinly and evenly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eImportant Veneer Advice:\u003c\/strong\u003e\u003cbr\u003e\nNever attempt to remove a failed finish from a veneered door using the\nsame aggressive sanding process that may be suitable for solid timber.\nIf the manufacturer does not approve sanding or refinishing, do not\nproceed.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSurfaces Requiring Extra Care\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSurface\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eConsideration\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommendation\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVeneered doors\u003c\/td\u003e\n\u003ctd\u003e\nVeneer thickness, adhesive and factory treatment may limit sanding\nor coating options.\n\u003c\/td\u003e\n\u003ctd\u003e\nFollow the door manufacturer’s instructions and trial before full\napplication.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eDark or reddish timber with 3033 Raw\u003c\/td\u003e\n\u003ctd\u003e\nWhite pigment may appear cloudy or chalky.\n\u003c\/td\u003e\n\u003ctd\u003e\nUse 3060 Clear Satin or another suitable finish following a trial.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eIngredient-rich hardwoods\u003c\/td\u003e\n\u003ctd\u003e\nNatural oils and extractives can interfere with absorption and\ndrying.\n\u003c\/td\u003e\n\u003ctd\u003e\nOsmo Wood Wax Finish Clear Extra Thin may be more suitable for\nsolid exotic timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBathroom or wet-room doors\u003c\/td\u003e\n\u003ctd\u003e\nIncreased humidity and moisture place extra demand on the finish.\n\u003c\/td\u003e\n\u003ctd\u003e\nOsmo Wood Protector 4006 may be considered as a base coat on\nsuitable solid timber, subject to testing and manufacturer\napproval.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePreviously painted or lacquered doors\u003c\/td\u003e\n\u003ctd\u003e\nDoor-Oil cannot penetrate through a film-forming coating.\n\u003c\/td\u003e\n\u003ctd\u003e\nCompletely remove the previous finish where the door construction\nallows.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eCabinet and cupboard interiors\u003c\/td\u003e\n\u003ctd\u003e\nRestricted ventilation can delay drying and retain odour.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply no more than one exceptionally thin cloth coat.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Application Tools\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eApplication Tool\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow It Is Used\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled application to door faces, frames, edges and moulded\nsections.\n\u003c\/td\u003e\n\u003ctd\u003e\nApply thinly with the grain and stretch the finish evenly without\nleaving heavy brush marks.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Microfibre Roller\n\n\u003c\/td\u003e\n\u003ctd\u003e\nLarger flat door faces where fast and even application is required.\n\u003c\/td\u003e\n\u003ctd\u003e\nLoad the roller lightly and spread the finish evenly, then check\nedges and overlaps before drying.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nApplicator Fleece\n\n\u003c\/td\u003e\n\u003ctd\u003e\nApplying an exceptionally thin second coat or refreshing smaller\nflat areas.\n\u003c\/td\u003e\n\u003ctd\u003e\nUse a small amount of product and work it thoroughly along the\ngrain, leaving no visible excess.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nWood Coating Brushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nDoor edges, frames, architraves, panels, mouldings and detailed\njoinery.\n\u003c\/td\u003e\n\u003ctd\u003e\nSelect a brush suited to the component and check corners for runs\nor pigment build-up.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOur Preferred Door Method:\u003c\/strong\u003e\u003cbr\u003e\nFor a flat door face, apply Door-Oil thinly with a suitable microfibre\nroller or\n\nOsmo Flat Brush\n.\nLay the finish off consistently along the grain and check all edges,\npanels and mouldings before it begins to dry.\n\u003c\/p\u003e\n\n\u003cp\u003e\nFor 3033 Raw Matt, inspect the surface from several angles and remove any\nvisible white pigment or heavy overlap marks.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAccessory\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThin and controlled application to doors, frames and joinery.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nApplying Door-Oil efficiently across large flat door faces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nHand Pad Holder and Applicator Fleece\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled second-coat application and future maintenance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nBrushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nApplying the finish to frames, architraves, mouldings and detailed\nsections.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable brushes, rollers and application tools after use.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Spray Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRoutine cleaning of completed Door-Oil finishes.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAvailable Sizes\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSize\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Coverage Per Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5ml Sample Sachet\u003c\/td\u003e\n\u003ctd\u003eSmall test area\u003c\/td\u003e\n\u003ctd\u003e\nChecking colour change, sheen and Raw pigment appearance on the\nactual door.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e125ml Sample Tin\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 3m²\u003c\/td\u003e\n\u003ctd\u003e\nLarger test areas, smaller joinery items or individual components.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e1L\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 24m²\u003c\/td\u003e\n\u003ctd\u003e\nMultiple doors, frames and larger interior joinery projects.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage is based on approximately 24m² per litre for one thin coat.\nActual coverage will vary according to timber species, porosity, sanding,\nsurface texture and the amount applied.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eCalculate for Two Coats:\u003c\/strong\u003e The stated coverage is for one\ncoat. New untreated doors normally require two thin coats, so 1 litre\nwill typically complete up to approximately 12m² as a full two-coat\nsystem.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eInterior oil-and-wax finish for wooden doors and joinery\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish options\u003c\/th\u003e\n\u003ctd\u003e3060 Clear Satin and 3033 Raw Matt\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended use\u003c\/th\u003e\n\u003ctd\u003eInterior doors, frames, linings and suitable joinery\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable sizes\u003c\/th\u003e\n\u003ctd\u003e5ml sample sachet, 125ml sample tin and 1L\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003eTwo exceptionally thin coats on bare timber\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRenovation coat\u003c\/th\u003e\n\u003ctd\u003e\nNormally one thin coat on a clean and properly prepared Door-Oil\nsurface\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate coverage\u003c\/th\u003e\n\u003ctd\u003eUp to approximately 24m² per litre, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate drying time\u003c\/th\u003e\n\u003ctd\u003eApproximately 12–24 hours with good ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum timber moisture\u003c\/th\u003e\n\u003ctd\u003eApproximately 18%\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication tools\u003c\/th\u003e\n\u003ctd\u003eOsmo Flat Brush or Microfibre Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool cleaning\u003c\/th\u003e\n\u003ctd\u003eOsmo Brush Cleaner \u0026amp; Thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReady to use\u003c\/th\u003e\n\u003ctd\u003eYes – shake and mix thoroughly, and do not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish characteristics\u003c\/th\u003e\n\u003ctd\u003e\nMicroporous, breathable, water-repellent and dirt-resistant\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003e\nCoverage and drying times are approximate. Temperature, humidity,\nventilation, timber species, veneer construction and application\nthickness will affect the result.\n\u003c\/p\u003e\n\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\nEnsure the timber is clean, dry, frost-free and free from grease, polish,\nwax, silicone and contamination.\n\u003c\/li\u003e\n\n\u003cli\u003e\nTimber moisture content must not exceed approximately 18%.\n\u003c\/li\u003e\n\n\u003cli\u003e\nShake and mix Door-Oil thoroughly before use, especially 3033 Raw.\n\u003c\/li\u003e\n\n\u003cli\u003e\nDo not thin the product.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCompletely remove old paints, varnishes and lacquers where the door\nconstruction permits.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean compatible old microporous oil finishes thoroughly before\nrecoating.\n\u003c\/li\u003e\n\n\u003cli\u003e\nConfirm that veneered doors can be sanded and refinished.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFor solid timber doors, sand consistently and normally complete the\nfinal sanding around P120–P150.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid sanding too finely when using 3033 Raw, as reduced absorption may\nleave white pigment sitting visibly on the surface.\n\u003c\/li\u003e\n\n\u003cli\u003e\nVacuum thoroughly, including panels, mouldings, edges, joints and\ncorners.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFill suitable cracks, joints and holes before the final sanding stage.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the first coat to all faces and edges before installation where\npractical.\n\u003c\/li\u003e\n\n\u003cli\u003e\nComplete a representative test area before treating the complete door.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eShake Raw Matt Thoroughly:\u003c\/strong\u003e The white pigment in 3033 Raw\ncan settle during storage. Failure to mix the product completely may\ncause patchiness or an inconsistent Raw appearance.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eNew Door Application\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nBring the product to normal room temperature and shake or stir it\nthoroughly. Do not thin.\n\u003c\/li\u003e\n\n\u003cli\u003e\nEnsure the door is clean, dry and completely free from sanding dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nSupport the door securely in a clean, well-ventilated area.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWhere practical, apply the first coat to both faces, edges and concealed\nareas before installation.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the first coat thinly using an\n\nOsmo Flat Brush\n\nor suitable microfibre roller.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork with the timber grain and spread the product evenly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCheck panels, mouldings, corners, edges and joints for heavy deposits or\nruns.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFor 3033 Raw, remove or redistribute visible white pigment before drying.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the first coat to dry for approximately 12–24 hours with good\nventilation.\n\u003c\/li\u003e\n\n\u003cli\u003e\nOnce completely dry, apply the second coat equally thinly.\n\u003c\/li\u003e\n\n\u003cli\u003e\nContinue ventilating throughout drying.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid closing the door tightly against seals or frames until the finish\nis dry.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\nKeep the coating thin and consistent across the whole door face. Heavy\napplication around mouldings, panel edges and lower rails can lead to\nruns, slow drying and visible sheen differences.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eApplying 3033 Raw Matt\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nShake and stir the product thoroughly to distribute the white pigment.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply an exceptionally thin coat with the timber grain.\n\u003c\/li\u003e\n\n\u003cli\u003e\nWork methodically and avoid heavy overlaps.\n\u003c\/li\u003e\n\n\u003cli\u003e\nInspect the door from several angles while the coating remains wet.\n\u003c\/li\u003e\n\n\u003cli\u003e\nBrush out or remove any visible white pigment, cloudy areas or heavy\nmarks.\n\u003c\/li\u003e\n\n\u003cli\u003e\nPay particular attention to mouldings, open grain and coarse sanding\nmarks where pigment may collect.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the first coat to dry fully before applying the second.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply the second coat just as thinly and consistently.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eRaw Matt Is Intended for Pale Timber:\u003c\/strong\u003e On dark, reddish,\nsmoked or exotic timber, the white pigment may remain visible as a pale\nhaze. Always complete a representative trial before proceeding.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eApplying to Frames, Linings and Architraves\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nPrepare and sand the timber consistently.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove all dust and contamination.\n\u003c\/li\u003e\n\n\u003cli\u003e\nUse a suitably sized brush for mouldings, rebates and detailed sections.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply Door-Oil very thinly with the grain.\n\u003c\/li\u003e\n\n\u003cli\u003e\nCheck corners and rebates for runs or heavy build-up.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAvoid coating rubber seals, ironmongery and adjacent finished surfaces.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the first coat to dry fully before applying the second.\n\u003c\/li\u003e\n\n\u003cli\u003e\nKeep doors open or suitably supported until the finish has dried.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eDrying and Use\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eStage\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Time\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eGuidance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBetween coats\u003c\/td\u003e\n\u003ctd\u003eApproximately 12–24 hours\u003c\/td\u003e\n\u003ctd\u003e\nThe first coat must be completely dry before applying the second.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eCareful handling\u003c\/td\u003e\n\u003ctd\u003eOnce the final coat has dried\u003c\/td\u003e\n\u003ctd\u003e\nAvoid impact, aggressive cleaning and prolonged contact with seals.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eNormal use\u003c\/td\u003e\n\u003ctd\u003eAfter sufficient drying and curing\u003c\/td\u003e\n\u003ctd\u003e\nMaintain ventilation and avoid heavy use while the coating develops.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eVentilation Is Essential:\u003c\/strong\u003e Low temperatures, high\nhumidity, restricted airflow or heavy application can considerably extend\nthe drying time and retain the typical smell of drying oil.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eCleaning and Maintenance\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMaintenance Stage\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoutine cleaning\u003c\/td\u003e\n\u003ctd\u003e\n\nOsmo Spray Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nMild everyday cleaning of oiled and waxed door surfaces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eStubborn marks on 3060 Satin\u003c\/td\u003e\n\u003ctd\u003eOsmo Liquid Wax Cleaner Clear\u003c\/td\u003e\n\u003ctd\u003e\nRemoves stubborn scuff marks and refreshes the satin appearance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e3033 Raw maintenance\u003c\/td\u003e\n\u003ctd\u003eMatching Door-Oil 3033 Raw\u003c\/td\u003e\n\u003ctd\u003e\nRefreshes worn areas without introducing additional shine.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eRenovation\u003c\/td\u003e\n\u003ctd\u003eMatching Osmo Door-Oil finish\u003c\/td\u003e\n\u003ctd\u003e\nRestores protection when slight signs of wear become visible.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eDo Not Use Liquid Wax Cleaner on 3033 Raw:\u003c\/strong\u003e Clear Liquid\nWax Cleaner can increase the sheen and alter the nearly invisible matt\nappearance of Raw-finished doors.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\nUse a soft cloth and avoid saturating the door with water. Remove\nfingerprints, dirt and spillages promptly, particularly around handles,\nlower rails and frequently touched edges.\n\u003c\/p\u003e\n\n\u003ch2\u003eRenovating a Previously Oiled Door\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\u003cli\u003e\nRemove dust and loose dirt.\n\u003c\/li\u003e\n\n\u003cli\u003e\nClean the door using a suitable Osmo cleaning product.\n\u003c\/li\u003e\n\n\u003cli\u003e\nAllow the surface to dry completely.\n\u003c\/li\u003e\n\n\u003cli\u003e\nInspect for polish, silicone, grease, deep scratches or failed areas.\n\u003c\/li\u003e\n\n\u003cli\u003e\nConfirm that any veneered surface can be safely prepared.\n\u003c\/li\u003e\n\n\u003cli\u003e\nLightly prepare damaged areas where appropriate.\n\u003c\/li\u003e\n\n\u003cli\u003e\nRemove all dust.\n\u003c\/li\u003e\n\n\u003cli\u003e\nApply one exceptionally thin coat of the matching Door-Oil finish.\n\u003c\/li\u003e\n\n\u003cli\u003e\nFeather local repairs carefully into the surrounding area.\n\u003c\/li\u003e\n\n\u003cli\u003e\nVentilate well and allow the coating to dry before closing or handling\nheavily.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eRecoat Before the Timber Becomes Bare:\u003c\/strong\u003e\u003cbr\u003e\nApply a maintenance coat when slight wear becomes visible. Renovating\nearly is usually much easier than attempting to repair timber that has\nbecome dirty, stained or completely unprotected.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eImportant Application Notes\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse on suitable interior wooden doors and joinery only.\u003c\/li\u003e\n\u003cli\u003eApply two exceptionally thin coats to new bare timber.\u003c\/li\u003e\n\u003cli\u003eShake and stir thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eDo not thin the product.\u003c\/li\u003e\n\u003cli\u003eApply with an Osmo Flat Brush or suitable microfibre roller.\u003c\/li\u003e\n\u003cli\u003eMaintain good ventilation during drying.\u003c\/li\u003e\n\u003cli\u003eAllow approximately 12–24 hours between coats.\u003c\/li\u003e\n\u003cli\u003eCheck door-manufacturer guidance before treating veneered doors.\u003c\/li\u003e\n\u003cli\u003eAvoid aggressive sanding of thin veneers.\u003c\/li\u003e\n\u003cli\u003eClear Satin enriches and darkens the natural timber colour.\u003c\/li\u003e\n\u003cli\u003eRaw Matt contains white pigment and is intended mainly for pale timber.\u003c\/li\u003e\n\u003cli\u003eRemove visible white pigment before allowing Raw to dry.\u003c\/li\u003e\n\u003cli\u003eHeavy application can cause slow drying and uneven sheen.\u003c\/li\u003e\n\u003cli\u003eIngredient-rich solid hardwoods may require Clear Extra Thin.\u003c\/li\u003e\n\u003cli\u003eApply only one exceptionally thin cloth coat inside cupboards.\u003c\/li\u003e\n\u003cli\u003eAvoid multipurpose cleaners, washing-up liquid, bleach and abrasives.\u003c\/li\u003e\n\u003cli\u003eAlways complete a trial application on the actual timber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTool Cleaning\u003c\/h2\u003e\n\n\u003cp\u003e\nClean suitable brushes, rollers and application tools immediately after use\nwith\n\nOsmo Brush Cleaner \u0026amp; Thinner\n.\n\u003c\/p\u003e\n\n\u003cp\u003e\nDo not reuse applicators containing uncured Clear Satin when applying Raw\nMatt, as contamination may alter the final appearance.\n\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\u003cp\u003e\n\u003cstrong\u003eOil-Soaked Cloth Safety:\u003c\/strong\u003e Cloths, pads and absorbent\nmaterials contaminated with drying oils can generate heat while curing.\nLay them flat outdoors to dry safely or store them in a suitable sealed\nmetal container before disposal in accordance with the safety data.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eComplete Your Osmo Door-Oil System\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Flat Brush\n\n\u003c\/td\u003e\n\u003ctd\u003e\nControlled application to doors, frames, edges and mouldings.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Roller Set\n\n\u003c\/td\u003e\n\u003ctd\u003e\nEfficient application across larger flat door faces.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nHand Pad Holder and Applicator Fleece\n\n\u003c\/td\u003e\n\u003ctd\u003e\nThin second-coat application and future maintenance.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nWood Coating Brushes\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFrames, architraves, mouldings and detailed joinery.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Brush Cleaner \u0026amp; Thinner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nCleaning suitable brushes, rollers and tools after use.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Spray Cleaner\n\n\u003c\/td\u003e\n\u003ctd\u003e\nRoutine cleaning of completed Door-Oil finishes.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo Polyx-Oil Original\n\n\u003c\/td\u003e\n\u003ctd\u003e\nGeneral-purpose protection for floors, staircases, furniture and\nother suitable interior timber.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\n\nOsmo TopOil\n\n\u003c\/td\u003e\n\u003ctd\u003e\nFood-safe protection for wooden worktops, tables and furniture.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"3060 - Clean Satin","offer_id":44661989867623,"sku":"qav1789815616718","price":35.46,"currency_code":"USD","in_stock":true},{"title":"3033 - Raw Matt","offer_id":44661989900391,"sku":"sej1789815616719","price":38.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/9109\/5911\/files\/osmo-door-oil-1l_1.png?v=1789815623","url":"https:\/\/yearroundseamwear.shop\/products\/osmo-door-oil-1l","provider":"My Store","version":"1.0","type":"link"}