{"product_id":"bona-traffic-hd-clear-2k-polyurethane-wood-floor-lacquer-495l","title":"Bona Traffic HD Clear 2K Polyurethane Wood Floor Lacquer 4.95L","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n\u003cdiv class=\"wwfs-product-intro\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eBona Traffic HD Clear 2K Polyurethane Wood Floor Lacquer\u003c\/strong\u003e is Bona's premium two-component, waterborne polyurethane finish for timber floors exposed to extreme wear, heavy foot traffic and demanding daily use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eColour and appearance:\u003c\/strong\u003e This is a clear, transparent topcoat. Silk Matt, Matt, Extra Matt and Anti-Slip describe the sheen or performance, not the colour. The timber, stain and primer beneath remain visible, while the lacquer may deepen and enhance their existing tone.\u003c\/p\u003e\n\n\u003cp\u003eTrusted by professional flooring contractors for busy homes, shops, restaurants, hotels, offices and public buildings, Bona Traffic HD combines exceptional scratch, wear and chemical resistance with extremely rapid hardness development.\u003c\/p\u003e\n\n\u003cp\u003eLight use is possible after approximately \u003cstrong\u003e6 hours\u003c\/strong\u003e, with the floor returning to full traffic after approximately \u003cstrong\u003e12 hours\u003c\/strong\u003e under normal drying conditions.\u003c\/p\u003e\n\n\u003cp\u003eEach pack contains \u003cstrong\u003e4.54L of polyurethane lacquer plus 0.41L of hardener\u003c\/strong\u003e, giving approximately \u003cstrong\u003e4.95L of mixed product\u003c\/strong\u003e. Available in Silk Matt, Matt, Extra Matt and Anti-Slip finishes.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eWhy Flooring Professionals Choose Bona Traffic HD\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-benefit-list\"\u003e\n\u003cul\u003e\n\u003cli\u003ePremium two-component waterborne polyurethane lacquer.\u003c\/li\u003e\n\u003cli\u003eExceptional durability for extreme wear.\u003c\/li\u003e\n\u003cli\u003eFull traffic after approximately 12 hours.\u003c\/li\u003e\n\u003cli\u003eLight use after approximately 6 hours.\u003c\/li\u003e\n\u003cli\u003eExcellent scratch, wear and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eExcellent flow and levelling.\u003c\/li\u003e\n\u003cli\u003eClear, non-yellowing formulation.\u003c\/li\u003e\n\u003cli\u003eLow odour with VOC below 5%.\u003c\/li\u003e\n\u003cli\u003eCompatible with a range of Bona wood floor primers.\u003c\/li\u003e\n\u003cli\u003eCan be applied over correctly prepared Bona Craft Oil 2K for a coloured lacquer system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSuitable Flooring \u0026amp; Areas\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-benefit-list\"\u003e\n\u003cul\u003e\n\u003cli\u003eBusy domestic homes.\u003c\/li\u003e\n\u003cli\u003eHallways, kitchens and living areas.\u003c\/li\u003e\n\u003cli\u003eRetail premises and shops.\u003c\/li\u003e\n\u003cli\u003eRestaurants, hotels and hospitality venues.\u003c\/li\u003e\n\u003cli\u003eOffices and public buildings.\u003c\/li\u003e\n\u003cli\u003eSolid wood flooring.\u003c\/li\u003e\n\u003cli\u003eEngineered wood flooring with a suitable sandable wear layer.\u003c\/li\u003e\n\u003cli\u003eParquet and herringbone flooring.\u003c\/li\u003e\n\u003cli\u003ePreviously lacquered timber floors prepared for recoating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\n\u003ch3\u003eWiltshire Wood Recommendation\u003c\/h3\u003e\n\n\u003cp\u003eBona Traffic HD is our preferred polyurethane lacquer where maximum durability and minimum downtime are required.\u003c\/p\u003e\n\n\u003cp\u003eFor untreated timber, apply one coat of a suitable Bona wood floor primer followed by two even coats of Bona Traffic HD.\u003c\/p\u003e\n\n\u003cp\u003eFor a coloured timber finish with the durability and easy maintenance of a lacquered floor, apply one carefully controlled coat of Bona Craft Oil 2K, prepare the dried oil correctly and follow with two coats of Bona Traffic HD.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eBona Traffic HD or Bona Mega EVO?\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSystem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBona Traffic HD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nTwo-component waterborne polyurethane lacquer\u003cbr\u003e\n\u003cstrong\u003eHardener included\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eHeavy domestic, commercial and public floors requiring maximum durability and rapid return to use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Mega EVO\u003c\/td\u003e\n\u003ctd\u003e\nOne-component self-crosslinking waterborne lacquer\u003cbr\u003e\n\u003cstrong\u003eNo hardener required\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eHeavy domestic and medium commercial floors where convenient one-component application is preferred.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Traffic HD Raw\u003c\/td\u003e\n\u003ctd\u003e\nTwo-component polyurethane raw-look lacquer\u003cbr\u003e\n\u003cstrong\u003eHardener included\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eHigh-traffic floors requiring maximum protection while preserving the look and feel of untreated timber.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003eChoose Bona Traffic HD where maximum durability is the priority. Choose Bona Mega EVO where a ready-to-use one-component system is preferred. Choose Bona Traffic HD Raw where the objective is to preserve a pale, untreated timber appearance.\u003c\/p\u003e\n\n\u003ch2\u003eChoose Your Finish\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFinish\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Sheen\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eExtra Matt\u003c\/td\u003e\n\u003ctd\u003eApproximately 10%\u003c\/td\u003e\n\u003ctd\u003eA modern, low-sheen appearance that keeps the floor looking natural while providing maximum Traffic HD protection.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003ctd\u003eApproximately 20%\u003c\/td\u003e\n\u003ctd\u003eA balanced matt finish with additional visual depth and timber definition.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eSilk Matt\u003c\/td\u003e\n\u003ctd\u003eApproximately 40%\u003c\/td\u003e\n\u003ctd\u003eA soft satin-style finish that enhances the colour and grain of the timber.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eAnti-Slip\u003c\/td\u003e\n\u003ctd\u003eApproximately 15%\u003c\/td\u003e\n\u003ctd\u003eDesigned for stairs, public areas and locations where enhanced slip resistance is required.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003eSheen figures are laboratory measurements taken on glass and may appear different on timber. Timber species, primer choice, sanding sequence, application rate and lighting will all influence the final appearance.\u003c\/p\u003e\n\n\u003ch2\u003eTraffic HD or Traffic HD Anti-Slip?\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSlip Classification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Traffic HD\u003c\/td\u003e\n\u003ctd\u003eHigh-traffic domestic and commercial timber floors requiring maximum durability and rapid return to use.\u003c\/td\u003e\n\u003ctd\u003eMatt and Extra Matt achieve R9 under EN 16165 Annex B.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Traffic HD Anti-Slip\u003c\/td\u003e\n\u003ctd\u003eStaircases, public spaces and areas where enhanced slip resistance is required.\u003c\/td\u003e\n\u003ctd\u003eR10 under DIN 51130 and low slip potential under BS 7976.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eCompatible Bona Primers\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCompatible Primer\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eColour Effect\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Classic UX\u003c\/td\u003e\n\u003ctd\u003eMedium-light natural colour.\u003c\/td\u003e\n\u003ctd\u003eA dependable all-round primer for most timber species and flooring projects.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Natural Primer\u003c\/td\u003e\n\u003ctd\u003eLight, freshly sanded raw wood appearance.\u003c\/td\u003e\n\u003ctd\u003ePale natural floors. For the closest untreated appearance, pair Bona Natural Primer with Bona Traffic HD Raw.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona White\u003c\/td\u003e\n\u003ctd\u003eWhitewashed Scandinavian appearance.\u003c\/td\u003e\n\u003ctd\u003eOak, ash, pine and other lighter timber species requiring a pale or whitewashed finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Intense\u003c\/td\u003e\n\u003ctd\u003eMedium-rich, warm timber colour.\u003c\/td\u003e\n\u003ctd\u003eMost wood species, including tropical timber, plank floors and floors over underfloor heating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eBona Amber\u003c\/td\u003e\n\u003ctd\u003eDeep, traditional amber colour.\u003c\/td\u003e\n\u003ctd\u003eOak, darker timbers and floors requiring a richer, solvent-finish-style appearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003eAlways test the complete primer and lacquer system on the actual timber. Timber species, sanding sequence, repairs and natural colour variation will influence the final appearance.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Coating Systems\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFloor Condition\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended System\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eUntreated timber flooring.\u003c\/td\u003e\n\u003ctd\u003eOne coat of a suitable Bona primer followed by two coats of Bona Traffic HD.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003ePreviously lacquered flooring.\u003c\/td\u003e\n\u003ctd\u003eThorough cleaning and superficial abrasion followed by one or two coats of Bona Traffic HD, subject to adhesion testing and Bona's recoating instructions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eColoured oil and lacquer system.\u003c\/td\u003e\n\u003ctd\u003eOne carefully applied coat of Bona Craft Oil 2K followed by two coats of Bona Traffic HD, using the preparation process detailed below.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eEnhanced slip resistance.\u003c\/td\u003e\n\u003ctd\u003eUse Bona Traffic HD Anti-Slip as part of the specified complete Bona coating system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eUsing Bona Traffic HD Over Bona Craft Oil 2K\u003c\/h2\u003e\n\n\u003cp\u003eBona Craft Oil 2K can be used beneath Bona Traffic HD to create a coloured timber floor with the excellent wear resistance, chemical resistance and easy maintenance of a professional polyurethane lacquer system.\u003c\/p\u003e\n\n\u003cp\u003eThis combines the colour and grain enhancement of a penetrating oil with the protective surface performance of Bona Traffic HD. It is particularly useful in busy homes and commercial interiors where an oil-only finish may require more frequent maintenance.\u003c\/p\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\n\u003ch3\u003eCraft Oil 2K Preparation Before Lacquering\u003c\/h3\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\n\u003cli\u003eApply one thin, controlled coat of Bona Craft Oil 2K to correctly sanded bare timber.\u003c\/li\u003e\n\n\u003cli\u003eWork the oil thoroughly into the timber using the selected application method.\u003c\/li\u003e\n\n\u003cli\u003eRemove every trace of surplus oil using clean Bona Oil Cloths.\u003c\/li\u003e\n\n\u003cli\u003eDo not leave wet oil, heavy deposits, roller texture or visible residue on the timber.\u003c\/li\u003e\n\n\u003cli\u003eAllow coloured Bona Craft Oil 2K to dry for at least 12 hours under normal conditions.\u003c\/li\u003e\n\n\u003cli\u003eAllow additional drying time where conditions are cool, humid or poorly ventilated, or where the timber species slows oil curing.\u003c\/li\u003e\n\n\u003cli\u003eRub the dried surface firmly with a clean white cotton or paper cloth.\u003c\/li\u003e\n\n\u003cli\u003eIf noticeable pigment transfers onto the cloth, the Craft Oil is not ready to be lacquered and must be allowed to dry for longer.\u003c\/li\u003e\n\n\u003cli\u003eOnce the surface is fully dry, buff the complete floor evenly using a red floor pad.\u003c\/li\u003e\n\n\u003cli\u003eVacuum the floor thoroughly to remove all loosened pigment, dust and residue.\u003c\/li\u003e\n\n\u003cli\u003eApply two even coats of Bona Traffic HD at the recommended application rate.\u003c\/li\u003e\n\n\u003c\/ol\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-advice-box\"\u003e\n\n\u003ch3\u003eImportant Craft Oil System Requirements\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBona Craft Oil 2K must be used on its own without Bona Rich Tone or other additives when it will be overcoated with Bona Traffic HD.\u003c\/li\u003e\n\u003cli\u003eAll surplus oil must be removed before the drying stage.\u003c\/li\u003e\n\u003cli\u003eThe floor must be completely dry before red-pad buffing and lacquering.\u003c\/li\u003e\n\u003cli\u003eDo not proceed while noticeable pigment transfers onto a clean white cloth.\u003c\/li\u003e\n\u003cli\u003eAlways carry out a representative test using the complete Craft Oil and Traffic HD system.\u003c\/li\u003e\n\u003cli\u003eThe timber species, sanding sequence, selected oil colour and lacquer sheen will all influence the final appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-table-wrap\"\u003e\n\n\u003ctable class=\"wwfs-spec-table\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eTwo-component waterborne polyurethane wood floor lacquer.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e4.54L polyurethane lacquer plus 0.41L hardener.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTotal mixed volume\u003c\/th\u003e\n\u003ctd\u003eApproximately 4.95L.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eSilk Matt, Matt, Extra Matt and Anti-Slip.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSolids content\u003c\/th\u003e\n\u003ctd\u003eApproximately 32%.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMixing ratio\u003c\/th\u003e\n\u003ctd\u003e0.41L hardener to 4.54L lacquer, or one hardener measure per litre when mixing smaller quantities.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to approximately 4 hours at 20°C; Anti-Slip approximately 3 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication rate\u003c\/th\u003e\n\u003ctd\u003eApproximately 8–10m² per litre, per coat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate coverage per pack\u003c\/th\u003e\n\u003ctd\u003eApproximately 40–50m² per coat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecoating time\u003c\/th\u003e\n\u003ctd\u003eApproximately 2–3 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLight use\u003c\/th\u003e\n\u003ctd\u003eAfter approximately 6 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFull traffic\u003c\/th\u003e\n\u003ctd\u003eAfter approximately 12 hours.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRugs, heavy objects and damp cleaning\u003c\/th\u003e\n\u003ctd\u003eAllow at least 3 days.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication tools\u003c\/th\u003e\n\u003ctd\u003eBona Microfleece Roller or Bona Swivel Head Applicator. Traffic HD Anti-Slip should be roller applied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptional extender\u003c\/th\u003e\n\u003ctd\u003eUp to 4% Bona Extender where a longer open time is required.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003eLacquer: 1 year; hardener: 18 months in the original unopened containers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eStore between +5°C and +30°C and protect from frost.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eEMICODE EC1, GREENGUARD Gold, EN 14904:2006 and EN 13501-1.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\n\u003cp class=\"wwfs-small-print\"\u003eCoverage and drying times are approximate and will vary according to timber porosity, temperature, humidity, ventilation and application rate. Figures are based on normal conditions of approximately 20°C and 60% relative humidity.\u003c\/p\u003e\n\n\u003ch2\u003eRecommended Application Tools\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-benefit-list\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\nBona SuperCoat Roller Head 250mm – optimised for an even application rate across timber floors.\u003c\/li\u003e\n\n\u003cli\u003e\nBona 250mm Roller Handle – compatible with the Bona SuperCoat Roller Head.\u003c\/li\u003e\n\n\u003cli\u003e\nTelescopic Extension Pole \u0026amp; Bona Roller Set – a complete application setup for larger flooring areas.\u003c\/li\u003e\n\n\u003cli\u003e\nBona Mixing Bottle – recommended when mixing smaller quantities to maintain the correct lacquer-to-hardener ratio.\u003c\/li\u003e\n\n\u003cli\u003e\nBona Oil Cloths – essential for removing all surplus Bona Craft Oil 2K before drying and overcoating.\u003c\/li\u003e\n\n\u003cli\u003e\nBona Craft Oil 2K – creates a professional coloured base beneath Bona Traffic HD when the approved preparation system is followed.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eFloor Preparation\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-benefit-list\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAllow the floor to acclimatise to its normal end-use environment.\u003c\/li\u003e\n\n\u003cli\u003eSand untreated flooring evenly back to clean, bare timber.\u003c\/li\u003e\n\n\u003cli\u003eComplete the final sanding sequence consistently across the full area.\u003c\/li\u003e\n\n\u003cli\u003eRemove all sanding dust using professional extraction and vacuuming.\u003c\/li\u003e\n\n\u003cli\u003eEnsure the surface is dry and free from wax, polish and contamination.\u003c\/li\u003e\n\n\u003cli\u003eWhere using Bona Craft Oil 2K as the colour base, follow the complete Craft Oil drying, pigment-transfer testing, red-pad buffing and vacuuming procedure before applying Traffic HD.\u003c\/li\u003e\n\n\u003cli\u003eAllow the lacquer and hardener to reach room temperature before mixing.\u003c\/li\u003e\n\n\u003cli\u003eIdeal application conditions are approximately 18–25°C and 30–60% relative humidity.\u003c\/li\u003e\n\n\u003cli\u003eThe minimum application temperature is 13°C.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003ch2\u003eMixing\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\n\u003cli\u003eShake the lacquer container before adding the supplied hardener.\u003c\/li\u003e\n\n\u003cli\u003eAdd the complete 0.41L hardener to the 4.54L lacquer when mixing the full pack.\u003c\/li\u003e\n\n\u003cli\u003eImmediately shake the combined mixture vigorously for approximately 60 seconds.\u003c\/li\u003e\n\n\u003cli\u003eUse standard Bona Traffic HD within approximately four hours, or the Anti-Slip version within approximately three hours.\u003c\/li\u003e\n\n\u003cli\u003eWhen mixing smaller quantities, use the Bona Mixing Bottle and follow the measurement divisions on the hardener container.\u003c\/li\u003e\n\n\u003c\/ol\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\n\u003col class=\"wwfs-step-list\"\u003e\n\n\u003cli\u003eApply evenly using a Bona floor finish roller at approximately 8–10m² per litre.\u003c\/li\u003e\n\n\u003cli\u003eRoll alternately across and with the direction of the timber grain.\u003c\/li\u003e\n\n\u003cli\u003eMaintain a wet edge and avoid puddles, heavy deposits and dry overlaps.\u003c\/li\u003e\n\n\u003cli\u003eAllow approximately 2–3 hours drying before applying the next coat.\u003c\/li\u003e\n\n\u003cli\u003eWhere required, carry out intermediate abrasion using the Bona Scrad System at P150 grit or finer and remove all dust.\u003c\/li\u003e\n\n\u003cli\u003eIf the previous lacquer coat has dried for longer than 24 hours, intermediate abrasion is mandatory before recoating.\u003c\/li\u003e\n\n\u003cli\u003eDo not apply more than two full coats of waterborne primer or lacquer in one day, as excessive moisture may cause timber swelling.\u003c\/li\u003e\n\n\u003cli\u003eMaintain good ventilation throughout application and drying.\u003c\/li\u003e\n\n\u003c\/ol\u003e\n\n\u003ch2\u003eGap \u0026amp; Surface Preparation\u003c\/h2\u003e\n\n\u003cp\u003eBefore applying the selected primer, Bona Craft Oil 2K or Bona Traffic HD, fill suitable fine joints and minor defects using Bona Mix \u0026amp; Fill Plus. Allow the filler to dry fully, complete the final sanding process and remove all dust before coating.\u003c\/p\u003e\n\n\u003ch2\u003eCleaning \u0026amp; Maintenance\u003c\/h2\u003e\n\n\u003cdiv class=\"wwfs-benefit-list\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFor routine cleaning, use the Bona Premium Wood Floor Spray Mop or another pH-neutral cleaner designed for lacquered wood flooring.\u003c\/li\u003e\n\n\u003cli\u003eFor economical refilling, use Bona Wood Floor Cleaner 4L.\u003c\/li\u003e\n\n\u003cli\u003eFloors finished using Bona Craft Oil 2K beneath Bona Traffic HD should be maintained as lacquered floors rather than oil-only floors.\u003c\/li\u003e\n\n\u003cli\u003eDo not apply oil-care or oil-maintenance products over the Traffic HD surface.\u003c\/li\u003e\n\n\u003cli\u003eAvoid steam cleaners, strong household detergents and excessive water.\u003c\/li\u003e\n\n\u003cli\u003eDo not damp mop the floor during the first three days after the final coat.\u003c\/li\u003e\n\n\u003cli\u003eDo not cover the floor with rugs or protective floor coverings during the first three days.\u003c\/li\u003e\n\n\u003cli\u003eUse suitable felt protection beneath furniture and avoid dragging heavy objects across the floor.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"wwfs-important-box\"\u003e\n\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\n\u003cp\u003eBona Traffic HD must be mixed accurately with its supplied hardener. Once mixed, the polyurethane lacquer has a limited working time and cannot be stored for later use.\u003c\/p\u003e\n\n\u003cp\u003eLight use is possible after approximately six hours and full traffic after around 12 hours, but avoid rugs, heavy objects and damp cleaning for at least three days.\u003c\/p\u003e\n\n\u003cp\u003eWhen applying Bona Traffic HD over Bona Craft Oil 2K, do not proceed until the oil is completely dry, free from transferable pigment, evenly red-pad buffed and thoroughly vacuumed.\u003c\/p\u003e\n\n\u003cp\u003eAlways follow the current Bona Technical Data Sheet and Safety Data Sheet before use.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Bona","offers":[{"title":"Silkmatt","offer_id":44661979185255,"sku":"twv1789815580324","price":149.78,"currency_code":"USD","in_stock":true},{"title":"Matt","offer_id":44661979218023,"sku":"kjl1789815580325","price":176.6,"currency_code":"USD","in_stock":true},{"title":"Extra Matt","offer_id":44661979250791,"sku":"tte1789815580326","price":147.54,"currency_code":"USD","in_stock":true},{"title":"Anti-Slip","offer_id":44661979283559,"sku":"ago1789815580327","price":183.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/9109\/5911\/files\/bona-traffic-hd-clear-2k-polyurethane-wood-floor-lacquer-495l_1.jpg?v=1789815606","url":"https:\/\/yearroundseamwear.shop\/products\/bona-traffic-hd-clear-2k-polyurethane-wood-floor-lacquer-495l","provider":"My Store","version":"1.0","type":"link"}